radial_tonebone_classic_v9

เอฟเฟ็คกีตาร์ Radial Tonebone Classic V9 Distortion Pedal

Radial

เอฟเฟ็คกีตาร์เสียงแตก Distortion Radial Tonebone Classic V9, 3-switchable gain stages from slight grit to saturation, 2-band EQ, Mid Switch, High Frequency Contour, And True Bypass

5,900 ฿

ราคาสินค้าไม่รวมภาษีมูลค่าเพิ่ม
หมวดหมู่: ป้ายกำกับ:

คำอธิบาย

Radial Tonebone Classic V9 Distortion Pedal with EQ

เอฟเฟ็คกีตาร์เสียงแตกแบบ Distortion Radial Tonebone Classic V9, 3-switchable gain stages from slight grit to saturation, 2-band EQ, Mid Switch, High Frequency Contour, And True Bypass

The Tonebone Classic-V9 is an ultra-responsive distortion pedal that lets you precisely adjust and focus the intensity of the distortion to suit your playing style and develop your own musical voice.

The design begins with a dual-stage input circuit with a three position switch that lets you set the distortion range to low for slight break-up like a vintage amp, mid-drive crunch like a more modern overdriven tone and full-on distortion. This is supplemented with a variable gain control that lets you fine tune the distortion to suit.

Unique to the Classic-V9 is the incredible dynamics and sensitivity. When you turn down the volume on your guitar, it cleans up like a real amp. This not only allows greater versatility when playing, but also serves to translate your playing style with greater accuracy so that your feel and intonation shines through.

Central to the design are the incredibly powerful high and low tone controls. These controls are post distortion to maximize the range. This approach brings a much more amp-like character to the distortion, resulting in a richer tone with improved dynamics.

A three-position, mid-range switch lets you enhance the all-important mid band frequencies for solos or can be used to fatten up single-coil pickups to bring out the Jeff Beck in your tone! This is rounded out with a high frequency control that lets you darken the signal to compensate for overly bright amps or enhance the harmonics when going for maximum saturation.

In use, the Classic-V9 is the ideal companion for vintage amps that need overdrive or clean amp channels that need a healthy dose of color. The tonal range is wide and powerful. Best of all, the incredibly responsive circuit truly allows your playing style to shine through.

Features:

  • Distortion pedal with amp-like characteristics
  • Dual-stage input allows the pedal to react naturally to your playing dynamics
  • 3 switchable gain stages from slight grit to saturation
  • Post-distortion 2-band EQ dials in your lows and highs
  • Mid-shift control selects your middle frequency
  • High control tames or boosts your high end

Specifications

Specifications  
Specifications are subject to change without notice.
Audio Circuit Type: Classic Class FET buffer and classic audio grade ICs
Frequency Response: Shaped for guitar use
Gain 0dB to +48dB
Noise Floor -78dBu
Maximum Input: +15dBu
Total Harmonic Disruption: <0.01%
Input Impedance: 220KΩ
Output Impedance: 12kΩ
Features  
Level: Output level control
Drive: Controls the amount of distortion from the drive circuit
High Shelf: Switchable high frequency boost/cut
Mid-Boost: Switchable 0dB, +7dB, +12dB @ 500Hz
Gain: Increases saturation of the drive circuit
Footswitch Latching bypass switch
LED Indicator: Large 3mm OD ultra-bright LED
General  
Power: 60mA, 9VDC (center pin negative)
Construction: 14 gauge steel
Finish: Durable powder coat
Size: L: 4.25″ x W: 4″ x H: 2″
Weight: 1.35lb
Shipping Size: L: 6.5″ x W: 4.13″ x H: 2.5″
Shipping Weight: 1.65lb
FCC Approval: Complies with section 15 of the FCC Rules
Conditions: For indoor use at temperatures between +5°C and +40°C
Warranty: Radial 3-year, transferable

Downloads

ดาวน์โหลด USER GUIDE Radial Tonebone Classic V9