l-acoustics_p1_processor

เครื่องปรับแต่งเสียง L-Acoustics P1 Digital Audio Processor

L-Acoustics

เครื่องปรับแต่งเสียงสัญญานเสียง L-Acoustics P1, 20 in x 16 out architecture, 8-bus matrix routing and mixing, EQ, delay and dynamics processing, Bridging of AVB, AES/EBU and analog audio, Milan-certified with seamless network redundancy

** ราคาและนโยบายผลิตภัณฑ์ L-Acoustics

Contact Us.....
หมวดหมู่: ป้ายกำกับ:

คำอธิบาย

L-Acoustics P1 AVB Processor and Measurement Platform

เครื่องปรับแต่งเสียงสัญญานเสียง L-Acoustics P1, 20 in x 16 out architecture, 8-bus matrix routing and mixing, EQ, delay and dynamics processing, Bridging of AVB, AES/EBU and analog audio, Milan-certified with seamless network redundancy

The P1 combines in one unit an EQ station with delay and dynamics processing and a multi-mic acoustic measurement platform with offline delay finder and EQ modelization. P1 allows bridging of AVB, AES/EBU and analog audio with time-aligned redundant signal distribution.

The processor features a 4-bus matrix routing and mixing within the 20 in x 18 out architecture. P1 control and monitoring can be operated from the front panel user interface and is also fully integrated within the LA Network Manager.

Features:

  • EQ, delay and dynamics processing
  • Multi-mic acoustic measurement platform
  • Bridging of AVB, AES/EBU and analog audio
  • 8-bus matrix routing and mixing
  • Fully integrated in LA Network Manager
  • Silent tuning (delay-EQ)
  • Time-aligned redundant signal distribution
  • 20 in x 16 out architecture
  • Milan-certified with seamless network redundancy

Specifications

Power supply

Mains rating 100 V – 240 V ( ±10%), 50-60 Hz
Connector Lockable IEC connector C13 with power on/off button

DSP

Digital Signal Processor (DSP) Dual SHARC 32-bit, floating point, 96 kHz sampling rate
Matrix Mixing 20 inputs to 8 independant busses
Mute, gain, PFL/AFL
Busses 8 busses + cue bus
Processing per bus Mute, gain, polarity
Delay up to 4000 ms
16 EQ filters
Direct routing From any input to any output
System tuning Integrated measurement platform for M1

Latency

Analog or AES/EBU 0.5 ms pass thru
DSP propagation delay 0.37 ms
Signal distribution Time-aligned redundant audio

Inputs

Milan-AVB 8 channels from 2 independant AVB streams on etherCONTM 1 Gb/s
Sampling frequency: 48 kHz or 96 kHz
AES/EBU 4 AES/EBU channels (2 x AES3) on 2 female 3-pin XLR
AES/EBU Sample Rate Converter (SRC) Operating at 24 bit / 96 kHz
Analog line 4 line channels on 4 female 3-pin XLR (rear)
Analog mic/line 4 mic/line channels on 4 female 3-pin XLR (front)
48 V phantom power
Gain 0 to 60 dB
2nd order highpass filter 40 Hz
Processing per input Mute, gain, polarity, gang

Outputs

Processing per output Mute, gain, polarity, gang
Analog line 4 line channels on 4 male 3-pin XLR
Milan-AVB 8 audio channels from 2 independent Milan-AVB streams
Sampling frequency: 48 kHz or 96 kHz
AES/EBU 4 AES/EBU output channels (2 x AES3) on 2 male 3-pin XLR
Sampling frequency and word length: 96 kHz at 24 bits
Headphones Stereo
Minimum load : 32 ohms

Interface

Display 1 TFT color touchscreen display (320 × 120 px)
Navigation 1 encoding wheel with push button

Remote control and monitoring

Network connection Dual-port Ethernet Gigabit interface
Milan seamless dual network redundancy
L-Acoustics remote control software LA Network Manager
General purpose inputs and outputs (GPIO) 2 GPI + 2 GPO on DB9 female connectors
Third-party management solutions QSC® / SNMP / Crestron®

Operating conditions

Temperature 0º C / 32º F to +50º C / 122º F

Features

Signal generator Sine wave, sine bursts, sweep, white noise and pink noise
Media player Stereo output at 24 bit / 96 kHz

Physical data

Height 1U
Weight 3.7 kg / 8.2 lb
Protection rating IP30

Downloads

ดาวน์โหลด Data Sheet L-Acoustic P1

ดาวน์โหลด All Docs L-Acoustic P1