L-Acoustic_la12x_amplifier

เพาเวอร์แอมป์ L-Acoustics LA12X 4-Channel Amplified Controller

L-Acoustics

เพาเวอร์แอมป์ 4 ชาแนล L-Acoustics LA12X,  4 x 2600 W at 4 ohms, 4 x 1400 W at 8 ohms, Built-in EQ station with 8 IIR, 4 FIR linear phase EQ filters Array morphing, Flexible 4×4 routing matrix, Third-party Q-SYS® / Crestron® / Control4® / Savant®/ SNMP / Extron®

** ราคาและนโยบายผลิตภัณฑ์ L-Acoustics

Contact Us.....
หมวดหมู่: ป้ายกำกับ:

คำอธิบาย

L-Acoustics LA12X 4-Channel Amplified Controller

เพาเวอร์แอมป์ 4 ชาแนล L-Acoustics LA12X,  4 x 2600 W at 4 ohms, 4 x 1400 W at 8 ohms, Built-in EQ station with 8 IIR, 4 FIR linear phase EQ filters Array morphing, Flexible 4×4 routing matrix, Third-party Q-SYS® / Crestron® / Control4® / Savant®/ SNMP / Extron®

LA12X is a four-channel amplified controller designed to power the largest loudspeakers in the L-Acoustics catalog. LA12X features a proprietary switch mode power supply (SMPS) with DSP-controlled power factor correction (PFC) capable of delivering 12,000 watts of output power with record hold times.

The universal SMPS (100 – 240 V) allows worldwide operation of LA12X with identical performance while the PFC grants a high tolerance to unstable mains with low power consumption. The 4 x 4 architecture offers both flexibility to power a high density of passive loudspeakers and a powerful amplfication for large format active enclosures.

Packaged in a 2U chassis, LA12X integrates powerful DSP resources with built-in loudspeaker optimization tools and the proprietary L-DRIVE system to protect the loudspeakers and the amplified controller. Beyond analog and AES/EBU inputs, LA12X features AVB inputs and allows for seamless redundancy following the Milan-AVB protocol.

Features:

  • 4 x 2600 W at 4 ohms, 4 x 1400 W at 8 ohms
  • Built-in EQ station with 8 IIR,
  • 4 FIR linear phase EQ filters Array morphing,
  • Flexible 4 x 4 matrix with 4 in and 4 out
  • Third-party Q-SYS® / Crestron® / Control4® / Savant®/ SNMP / Extron®

Specifications

Amplification and power supply

Amplification class Class D
Output power, all channels loaded 4 x 3300 W at 2.7 ohms
4 x 2600 W at 4 ohms
4 x 1400 W at 8 ohms
Power supply model Universal Switched Mode Power Supply (SMPS) with Power Factor Correction (PFC)
Mains rating 100 V – 240 V ±10%, 50-60 Hz

DSP

Digital Signal Processor (DSP) Dual SHARC 32-bit, floating point, 96 kHz sampling rate
I/O routing Flexible 4×4 routing matrix
Per output channel Built-in EQ station with 8 IIR, 4 FIR linear phase EQ filters
Array morphing, Air absorption compensation filters
Internal IIR and FIR EQ algorithms
L-DRIVE advanced system protection
Output delay from 0 to 1000 ms

Technologies

Loudspeaker management L-DRIVE advanced system protection

Latency

Standard latency (analog/digital inputs) 3.84 ms
Low latency (analog/digital inputs) 0.84 ms

Inputs

Milan-AVB 4 channels from 1 stream (of up to 8 channels)
AES/EBU 4 channels AES/EBU (2 x AES3) with SRC
Analog 4 channels
Connections 2 etherCON 1 Gb/s I/O+ control
4 female 3-pin XLR (2 x switching analog/AES3)
4 male 3-pin XLR links

Outputs

Loudspeaker connections 2 × 4-point speakON®
1 × 8-point CA-COM

Circuit protection

Mains and power supply Over and under voltage / over temperature / overcurrent
Power outputs Over current / DC / short circuit / rail over and under voltage / over temperature

Interface

Display/indicators LCD and LED’s
Navigation Rotary encoder, power and mute keys

Remote Control and monitoring

L-Acoustics remote control software LA Network Manager
Third-party management solutions Q-SYS® / Crestron® / Control4® / Savant®/ SNMP / Extron®

Operating conditions

Temperature 0º C / 32º F to +50º C / 122º F

Physical data

Height 2U
Weight 14.5 kg / 32 lb
Protection rating IP20

Downloads

ดาวน์โหลด Data Sheet L-Acoustics LA12X