Music Space (Thailand)

Member

สินค้า

ลดราคา!
dbx_venu360

เครื่องปรับแต่งเสียง dbx DriveRack VENU360-V Loudspeaker Management

DBX

อุปกรณ์ปรับแต่งเสียงแบบดิจิตอล dbx DriveRack VENU360, 5 x 6 Routing / 3 x 6 Signal Processing, Enhanced AFS Feedback Elimination, AutoEQ, dbx Compression/Limiting, Selectable Crossover Filters, 25 x Factory / 75 x User Presets, Android, iOS, Mac, and Windows Control

Original price was: 67,600 ฿.Current price is: 47,900 ฿.

ราคาสินค้าไม่รวมภาษีมูลค่าเพิ่ม
หมวดหมู่: ป้ายกำกับ:

คำอธิบาย

dbx DriveRack VENU360-V Loudspeaker Management

อุปกรณ์ปรับแต่งเสียงแบบดิจิตอล dbx DriveRack VENU360 5 x 6 Routing / 3 x 6 Signal Processing, Enhanced AFS Feedback Elimination, AutoEQ For Room Equalization, dbx Compression/Limiting, Selectable Crossover Filters, 25 x Factory / 75 x User Presets, Android, iOS, Mac, and Windows Control

The DriveRack VENU360 from dbx is a loudspeaker-management processor designed to protect and optimize front-of-the house, stage monitor, delay-fill, and zone loudspeaker systems in clubs, outdoor music events, or houses of worship.

Connect the VENU360 between your mixer and amplifiers/powered speakers, and use it for precise feedback elimination, automatic speaker level and room equalization, crossover-frequency setting, dbx compression/limiting, driver alignment delay, and more.

The unit provides a 5 x 6 routing/mixing matrix (using four AES signals and one analog signal) and a 3 x 6 signal processing chain. The 24-bit A/D and D/A converters with dbx Type IV conversion protect the incoming audio signal from accidental digital clipping at the A/D stage, while the 32-bit floating point, 48 / 96 kHz internal processing produces professional audio quality with high headroom and wide dynamic range.

For easy operation, the Wizard functions guide you through simple, step-by-step processes to help you quickly configure the unit. For more control, you can use the manual mode which lets you customize each parameter separately.

A large, bright, LCD display and nine 6-segment signal meters provide easy-to-read visual feedback. Additionally, the free DriveRack VENU360 control application offers network control via the built-in Ethernet port, and is available for iOS, Android, Mac, and Windows-compatible devices.

Features:

  • Provides a 5 x 6 routing/mixing matrix with a 3 x 6 signal processing chain
  • 24-bit A/D & D/A converters with dbx Type IV conversion and 48 / 96 kHz, 32-bit floating-point processing – with sample rate conversion
  • Setup Wizard for easy system configuration and Level Assist Wizard for system level balancing
  • AutoEQ Wizard for fast & accurate room equalization using 10-band parametric EQ; further user adjustments can be made to bands 11 to 14
  • AFS Wizard for easy & accurate feedback suppression
  • Support for multi-mono, stereo, LCR, & aux-fed sub input configurations
  • Selectable 31-Band graphic EQ or 12-band parametric EQ with narrow notch capabilities for speaker tuning
  • Input Delay processing for aligning the sound system of the stage backline, and Fill Delay processing for balcony & tower delays – up to 3000 ms total cascaded delay time (3 x configurable delay modules at 1000 ms each)
  • dbx compression with dbx PeakStopPlus output limiters
  • Crossover with support for full range up to mono 6-way configurations – selectable crossover filter types & slope rates with adjustable polarity & variable phase control
  • Noise Gate to remove unwanted low-level noise in sound system
  • Subharmonic Synthesis for deep, punchy bass
  • 3 x XLR inputs (selectable between 4 x AES or 3 x analog input channels), and 6 x analog outputs
  • Front-panel RTA mic input with 48V phantom power
  • Built-in signal generator & RTA for system fine-tuning & troubleshooting
  • Large, bright, easy-to-read LCD display and 6-segment signal meters with input clip & output limiter indicators
  • 25 x factory / 75 x user presets with various speaker & amplifier tunings included
  • Network control via the free VENU360 Control Application for iOS, Android, Mac & Windows-compatible devices

Specifications

Input (3) analog line inputs/(2) AES digital inputs (shared connectors), (1) RTA mic input
Input Connectors (3) female XLRs (2 selectable between analog/AES digital audio formats), (1) female XLR RTA mic input
Input Type Electronically balanced/RF filtered
Input Impedance > 30 kΩ, balanced line to line
Max Input Level (line inputs) > +28 dBu, balanced, ≤1% THD
CMRR > 50 dB @ 1 kHz
RTA Mic Preamp Phantom Power +48 VDC
Output (6) Line Outputs
Output Connectors Male XLR
Output Type Electronically balanced, RF filtered
Output Impedance 120 Ω, balanced line to line
Max Output Level +22 dBu, balanced, ≤1% THD
Alignment Delay Up to 1000 ms per output channel
A/D Converter 24-bit with dbx Type IV™ Conversion System
A/D Dynamic Range 117 dB A-weighted, 114 dB unweighted, 22 kHz BW
Type IV Dynamic Range 129 dB with transient material, A-weighted, 22 kHz BW; 126 dB with transient material, unweighted, 22 kHz BW; 121 dB typical with program material, A-weighted, 22 kHz BW
D/A Converter 24-bit
D/A Dynamic Range 116 dB A-weighted, 113 dB unweighted, 22 kHz BW
Internal Processing Wordlength 32-bit floating point
Supported Sample Rates 48/96 kHz (32-192 kHz using sample rate conversion)
System Performance Dynamic Range 114 dB A-weighted; 110 dB unweighted
THD+Noise 0.0025% typical at +4 dBu, 1 kHz, 0 dB input gain
Frequency Response 20 Hz – 20 kHz, +0 /- 0.5 dB
Interchannel Crosstalk < -97 dB, -105 dB typical 20-20 kHz, +4 dBu, all channels measured
Latency Analog input to output: 2.57 ms (48 kHz), 2.28 ms (96 kHz); Digital AES input to output: 2.31 (48 kHz), 2.15 ms (96 kHz)
Operating Voltage 100-240 VAC 50/60 Hz
Power Consumption 18 W
Unit Weight 5.48 lbs. (2.49 kg)
Shipping Weight 7.10 lbs. (3.22 kg)
Dimensions 1.75” (H) x 8.0” (D) x 19” (W), 4.4cm (H) x 20.32cm (D) x 48.26cm (W)

Downloads

Download Data Sheet dbx DriveRack VENU360-D

Video

สินค้าที่เกี่ยวข้อง