ลำโพง Turbosound Milan M10 Powered Loudspeaker 10″

Name: ลำโพง Turbosound Milan M10 Powered Loudspeaker 10"
Brand: Turbosound
SKU: 37737
Availability: InStock

ลำโพงกลางแจ้ง Turbosound Milan M10 เป็นตู้ลำโพงแบบมีกำลังขยายในตัว 600 วัตต์ ขนาดดอกลำโพง 10″ Woofer, 1″ High Compression Driver, Class-D Amplifier

16,000 ฿

ราคาไม่รวมภาษีมูลค่าเพิ่ม...เป็นราคาใบละ...

สอบถามและสั่งซื้อสินค้า Order FAQS

หมวดหมู่: ลำโพงแบบมีกำลังขยายในตัว ป้ายกำกับ: Turbosound Brand: Turbosound

คำอธิบาย

Turbosound Milan M10 Powered Loudspeaker

he Milan M10 600-Watt 2-Way 10″ Powered Loudspeaker from Turbosound is a Class-D powered speaker that can be used for a variety of PA applications in both portable and installed scenarios. It features 2 independent input channels with mic and line inputs as well as a 2-band EQ and intelligent limiting. A mix output connector allows you to connect to other Milan series loudspeakers.

Its processing is powered by the integrated Klark Teknik DSP and has an electronic crossover. A low-cut filter at 100 Hz allows you to use the M10 as a wedge monitor, but it can also be pole mounted or flown for a variety of placement options. Its trapezoidal enclosure is constructed from high density polypropylene and is designed to reduce resonances internally. It features a recessed handle for carrying.

Features:

2-way full range powered loudspeaker for portable PA and installation applications
600 Watt power featuring Klark Teknik Class-D technology
Klark Teknik Digital Signal Processing for total system control
High excursion 10-inch low frequency driver with low mass voice coil for transient response
1-inch high temperature dome compression driver with extended high frequency reproduction
Converging elliptical waveguide provides wide dispersion and excellent pattern control
Speech/music switch featuring optimized equalization for voice or music applications
Switchable 100 Hz high pass filter for subwoofer integration
Lightweight composite enclosure with black finish
Rugged powder coated perforated steel mesh grille
Dual angle pole mount for accurate audience coverage
Multiple internal rigging points for installation applications

Specifications

Components	LF Driver: 1x 10″ (254 mm) HF Compression Driver: 1x 1″(25 mm)
Frequency Response	55 Hz to 18 kHz, +/-3 dB 50 Hz to 20 kHz, +/-10 dB
Nominal Dispersion	90° H x 60° V @ -6 dB points
Maximum SPL	126 dB, peak
Construction	Injection-molded polypropylene enclosure Recessed carrying handle Integral dual-angle pole mount socket 6x M10 threaded internal rigging points
Grille	Powder coated galvanized perforated steel mesh grille with foam backing
Connectors	Mic/Line Input: XLRF/TRS combo jack, wired pin 2 hot Mix Output: Male XLR wired pin 2 hot IEC mains connector with integrated fuseholder
Controls	Level, Line/Mic, Low Cut, Speech/Music, Bass and Treble, Front LED, Mains on/off
Indicators	Blue Power LED Green Signal LED Red Limit LED Red Clip LED
Amplifier	Type: Class-D Maximum Power Output: 500 W (LF) ; 100 W (HF) Input Sensitivity: -32 dBu (Mic), -2 dBu (Line) Microphone Input Impedance: 560 Ω unbalanced, 1 kΩ balanced Line Input Impedance: 20 kΩ unbalanced, 40 kΩ balanced EQ: Bass +/-6 dB @ 80 Hz, Treble +/-6 dB @ 12 kHz Amplifier Protection: Full short circuit, open circuit, thermal
Mains Voltage	USA/Canada: 100-120 V~ (T 6.3 A H 250 V) UK/Australia/Europe: 220-240 V~ (T 3.15 A H 250 V) China: 220-240 V~ (T 3.15 A H 250 V) Japan: 100-120 V~ (T 6.3 A H 250 V)
Power Consumption	80 W @1/8 max power
Dimensions (HxWxD)	20.6 x 13.0 x 11.6″ (522 x 329 x 294 mm)
Weight	29.3 lb (13.3 kg)