tascam_us16x08_2

ออดิโอ อินเตอร์เฟส TASCAM US-16×08 USB Audio Interface

ออดิโออินเตอร์เฟส TASCAM US16X08 24-bit/96 kHz Resolution, 8x XLR Mic Inputs & 8x TRS Line Inputs, DSP Monitor Mixer with EQ & Compression, EQ and Compression on Each Monitor Mixing Channel, Ultra-HDDA Microphone Preamps, High Resolution Recording

13,900 ฿

ราคาสินค้าไม่รวมภาษีมูลค่าเพิ่ม

หมวดหมู่: ป้ายกำกับ:

รายละเอียดเพิ่มเติม

TASCAM US16x08 USB Audio Interface

ออดิโออินเตอร์เฟส TASCAM US16X08 24-bit/96 kHz Resolution, 8x XLR Mic Inputs & 8x TRS Line Inputs, DSP Monitor Mixer with EQ & Compression, EQ and Compression on Each Monitor Mixing Channel, Ultra-HDDA Microphone Preamps, High Resolution Recording

Allowing you to record up to 16 channels simultaneously in up to 24-bit/96 kHz resolution, the US-16×08 USB Audio/MIDI Interface from Tascam features 8 XLR microphone inputs with their Ultra-HDDA preamps and 8 TRS line level inputs, 2 of which can be switched to instrument level for DI recording. A DSP mixer allows you to route any signal to any output and gives you a 4-band EQ and compression for each channel, allowing you to tweak a monitor or headphone mix.

Its angled design allows you to use the US-16×08 right on your desktop, while the included rack ears provide the ability to rack mount the system. Not limited to audio, its 5-pin DIN MIDI I/O lets the unit function as a MIDI interface as well. It is compatible with Mac, Windows, and iOS (requires Apple’s Camera Connection kit, not included for iOS use)

Discrete Ultra-HDDA Mic Preamps

Tascam’s Ultra-HDDA (High Definition Discrete Architecture) mic preamp design is based on discrete components, just like classic professional gear. They achieve an EIN rating of -125 dBu, meaning their noise level is practically below the range of hearing. But instead of judging the design merely by test measurements, key components were selected following extensive listening tests

NE5532 Op-Amps

Tascam uses proven components throughout the US-16×08. One example is the NE5532 op-amp, used throughout classic recording consoles and signal processors due to their musical sound

Instrument Inputs

The first two channels can be switched to direct guitar inputs for direct recording of electric and acoustic guitar and bass without the need for an external preamp

High SPL Handling

The Ultra HDDA mic preamps and line inputs offer 20 dB of headroom for distortion-free recordings of percussive, high SPL instruments like drum tracks and guitar solos

8 XLR Mic Inputs and 8 TRS Line Inputs

The eight XLR mic inputs have switchable +48V phantom power to use up to 8 condenser mics at the same time. The two front panel TRS line inputs are switchable between instrument level and line level input with adjustable gain. An additional six TRS line ins on the rear of the unit are switchable between -10dB and +4dB. All of the jacks support balanced or unbalanced 1/4″ signals

Standalone Mic Preamp
When powered on without a USB connection, the US-16×08 functions as an 8-channel microphone     preamp. Mics pass through the Ultra-HDDA preamps to the eight balanced line outputs on the rear panel. Use the interface to add additional high-quality mic inputs to a mixer or audio interface

DSP Mixer and USB Driver

Digital processing features like the DSP Monitor Mixer and USB drivers make sessions with the US-16×08 comfortable for the musicians and engineer. The DSP Mixer includes processing for a polished-sounding headphone mix without latency delay from your DAW software, fueled by a Blackfin DSP processor. And drivers, re-written from the ground up, provide improved compatibility and performance on Mac, Windows and iPad recording systems

High Resolution Recording

The converters and electronics on the US-16×08 allow you to record at audio resolutions up to 96 kHz/24-bit for detailed acoustic productions

Standard USB 2.0 Computer Connection

The US-16×08 uses USB 2.0 to connect to your computer. Connect the interface to any available USB port. USB 2.0 provides plenty of data bandwidth, even when recording 16 channels at 96 kHz/24-bit. The US-16×08 will also work with USB 3.0 jacks on your computer

EQ and Compression on Each Monitor Mixing Channel

Powered by an Analog Devices BlackFin DSP processor, the US-16×08 includes an advanced digital mixer for monitor mixing. Each input includes 4-band EQ, a low-cut filer, and compressor. The DSP mixer can store up to 10 snapshots as scenes – making it easy to recall mixer settings. The DSP mixer feature can even be used as a live mixer, controlled by your PC. An additional tab opens a digital patchbay to route signals to any output

Driver Software

The US-16×08 includes a driver architecture that was written in-house by Tascam engineers. The Windows driver software can be installed without connecting the interface, with simple on-screen instructions. Mac users can use the interface without installing a driver at all. Simply install the control panel software in order to change device settings. Finally, the class-compliant driver allows it to be used with tablets like Apple’s iPad. (Requires Apple’s Camera Connection Kit for USB connection, not included)

Angled Design

The angled design makes desktop viewing and operation much more comfortable for tabletop use. All other interfaces have their controls on the front or the top of the device, causing you to crane your neck to read the knobs and switches. A pair of rack ears are also included for use in a standard 19″ equipment rack

Independent Headphone and Line Output Volume Control

The US-16×08 includes both headphone and line output volume controls. Even when both powered monitors and headphones are connected, the user can set an optimum level for each during operation. And when you want to work on headphones, you don’t need to reach around to switch off your monitors

Built-In Headphone Amplifier

The 70 mW+70 mW (into 32 ohms) headphone amp makes headphone monitoring easy even in loud situations. This assures you enough monitoring volume when recording drums, guitars, or rehearsals, live or in the studio

MIDI I/O

Standard MIDI input and output connectors allow connection with the thousands of keyboards, drum machines, controllers, and other sources that employ 5-pin DIN MIDI connectors. The interfaces can also be used for synchronized operation of multitrack recorders and other external recording equipment

Full Metal Body

The durable metal jacket is employed for heavy duty use

Specifications

AUDIO INTERFACE USB TASCAM US16x08

Resolution
Sampling Frequency 44.1, 48, 88.2, 96 kHz
Bit Rate 16/24-bit
Analog Audio Inputs
Microphone Input Connector: XLR-3-31(1: ground, 2: hot, 3: cold ), balanced

Input Impedance: 2.4 kOhms

Nominal Input Level, Max Gain: -68 dBu (0.0003 Vrms)

Nominal Input Level, Minimum Gain: -12 dBu (0.195 Vrms)

Maximum Input Level: +8 dBu (1.947 Vrms)

Gain: 56 dB

Instrument Input Connector: 1/4″ (6.3 mm) TS-jack (T: hot, S: ground), unbalanced (When set to “INST” at LINE/INST switch)

Input Impedance: 1 MOhms or more

Nominal Input Level, Max Gain: -41 dBu (0.0069 Vrms)

Nominal Input Level, Minimum Gain: +4 dBu (1.228 Vrms)

Maximum Input Level: +24 dBu (12.182 Vrms)

Gain: 45 dB

Line Input Set to -10 dBV at Level Switch:

Connector: 1/4″ (6.3 mm) TS-jack (T: hot, S: ground), balanced

Input Impedance: 10 kOhms or more

Nominal Input Level, Max Gain: -41 dBu (0.0069 Vrms)

Nominal Input Level, Minimum Gain: +4 dBu (1.228 Vrms)

Maximum Input Level: +24 dBu (12.182 Vrms)

Gain: 45 dB

Set to +4 dBu at Level Switch:

Connector: 1/4″ (6.3 mm) TS-jack (T: hot, S: ground), unbalanced

Input Impedance: 10 kOhms or more

Nominal Input Level: +4 dBu (1.228 Vrms)

Maximum Input Level: +24 dBu (12.182 Vrms)

Analog Audio Outputs
Line Output Connector: 1/4″ (6.3 mm) TS-jack (T: hot, S: ground), balanced

Output Impedance: 100 ohms

Nominal Output Level: +4 dBu (1.228 Vrms)

Maximum Output Level: +24 dBu (12.177 Vrms)

Headphones Connector: 1/4″ (6.3 mm) stereo phone jack

Maximum Output Level: 70 mW +70 mW or more (THD+N 0.1% or less, 32 ohms loaded)

MIDI
Connector 5-pin DIN
Format Standard MIDI format
USB
Connector USB B type, 4 pin
Format USB 2.0 HIGH SPEED mass storage class
Power
Power Dedicated AC adapter
Power Consumption 12 W
Audio
Frequency Response Line Output (Balanced):

44.1/48 kHz: 20 Hz to 20 kHz, +/-0.3 dB (JEITA)

88.2/96 kHz: 20 Hz to 40 kHz, +/-0.3 dB(JEITA)

THD 0.008 % or less
S/N Ratio 100 dB or more
Crosstalk 100 dB or more
EIN -125 dBu or less
System Requirements
Windows OS: Windows 7 (32-bit SP1, 64-bit SP1), Windows 8.0 (32-bit, 64-bit), Windows 8.1 (32-bit, 64-bit)

Computer Compatibility: Windows compatible computer with a USB 2.0 port

CPU Type/Speed: Dual core/2 GHz or faster

Memory: 2 GB or more

Driver: ASIO 2.0, WDM (MME)

Mac OS: OS X 10.9, OS X 10.9

Compatible Computers: Apple Mac with USB 2.0 port

CPU Type/Speed: Dual core/2 GHz or faster

Memory: 2 GB or more

Driver: Core Audio, Core MIDI

iOS iOS 7
General
Operating Temperature 41 to 95°F (5 to 35°C)

Downloads

 ดาวน์โหลด Datasheet ออดิโอ อินเตอร์เฟส USB TASCAM US16x08

Video