Music Space (Thailand)

Member

สินค้า

tascam_sonicview24_digital_mixer

มิกเซอร์ดิจิตอล TASCAM Sonicview 24 Digital Mixer

TASCAM

มิกเซอร์ดิจิตอล TASCAM Sonicview 24, 44 input ch (or 40 mono input ch and 2 stereo input ch) and 4 FX return, FPGA Mix Engine + 32-Bit / 96 kHz AD/DA, 3 x 7″ Touchscreens + Motorized Faders, 24 HDIA Microphone Preamps, 24 XLR Mic/Line Input

306,900 ฿

ราคาสินค้าไม่รวมภาษีมูลค่าเพิ่ม
หมวดหมู่: ป้ายกำกับ:

คำอธิบาย

TASCAM Sonicview 24 Interactive Digital Mixing Station

มิกเซอร์ดิจิตอล TASCAM Sonicview 24, 44 input ch (or 40 mono input ch and 2 stereo input ch) and 4 FX return, FPGA Mix Engine + 32-Bit / 96 kHz AD/DA, 3 x 7″ Touchscreens + Motorized Faders, 24 HDIA Microphone Preamps, 24 XLR Mic/Line Input 

The Tascam Sonicview 24 is a high powered mixing desk with motorised faders per channel, assignable function keys and a state of the art triple screen design. The TASCAM Sonicview 24 offers motorized channel faders in two banks of eight, plus a motorized stereo fader for the main bus. Above each bank of channel faders is a color touch panel that allows you to view entire mixer channels, or get down to details, controlling each parameter with your fingertip.

TASCAM Sonicview mixing consoles integrate beautifully with the rest of your system, thanks to built-in Dante networking, a 32-bit/96 kHz multi-channel USB audio interface, and plenty of I/O. No-compromise audio quality, including 54-bit float-point FPGA mixing, combines with ample signal processing, an expansion slot for additional connectivity, and wireless remote control to make TASCAM Sonicview mixers a next-generation choice for touring, installed sound, recording studios, and broadcasting.

Features:

  • AD/DA conversion: 32bit / 96kHz
  • Tascam HDIA (High-Definition Instrumentation Architecture) mic preamp
  • FPGA mixing engine with 54-bit float-point and 96kHz sampling rate
  • 44 input channels (40 mono, 2 stereo)
  • 22 flexible output buses + main L/R bus with 31-band graphic EQ
  • multiple displays with two 7-inch color touchscreens
  • Visual Interactive Ergonomic Workflow (VIEW) interface enables intuitive operation with three view modes
  • Latency: 2 × Fs (20.8µs) in mixing engine, 0.51ms analogue-to-analogue
  • built-in Dante interface with 64 inputs and outputs (supports redundancy, AES67, DDM, and SMPTE 2110)
  • USB audio interface with 32 inputs and outputs
  • internal 2-track record/playback to SD card or USB flash drive
  • four multi-effects processors
  • 24 + 1 motorised faders (100mm)
  • 24 encoder knobs with color LEDs
  • 24 LC displays with color LEDs for channel name, input level and gain reduction meter
  • 18 assignable user keys
  • seven custom fader layers and eight DCA groups
  • Gigabit Ethernet connection (1000BaseT)
  • In- / Outputs: 24x mic/line input (3-pin XLR, balanced)
  • 8x line input (6.3mm jack, balanced), max. input level: +32dBu
  • input impedance: 5kOhm
  • 2x insert (6.3mm jack)
  • 1x talkback input (3-pin XLR)
  • 2x Stereo input L/R (RCA)
  • 16x Line output (3-pin XLR, balanced), output impedance: 100Ohm
  • 2x stereo headphone output (1x 6.3mm jack, 1x 3.5mm jack)
  • 2x monitor output (3-pin XLR), max. output level: +24dBu
  • 1x lamp connector (4-pin XLR)
  • 1x footswitch connector (6.3mm jack)
  • 1x word clock input (BNC socket)
  • 1x word clock out/thru (BNC socket)
  • 2x USB connector (1x type-B, 1x type-C)
  • 1x GPIO with eight inputs/outputs via Sub-D25 connector
  • remote control and offline editing via Tascam Sonicview software for Windows, MacOS and iOS
  • two Tascam expansion slots (optional 32-track SDXC recorder, MADI, AES/EBU and analogue I/O cards available for the second slot)
  • power switch with protection

Specifications

Processing capabilities
Inputs 52 audio channels
(40 mono, 2 stereo, 4 stereo effect returns)
Busses 32
(22 Aux/Group switchable mix busses, 1 stereo main bus, 4 stereo send busses)
Built-in effects 4
Selectable signal sources
At 96 kHz 160 maximum
At 48 kHz 256 maximum
Mic/Line (XLR) 24
Line (RCA) 4 (2 × stereo)
Dante 32 (96 kHz), 64 (48 kHz)
Expansion cards 2 × 32 (96 kHz), 2 × 64 (48 kHz)
USB audio 32
Built-in player 2 (1 × stereo)
Oscillator 1
Talkback 1
Selectable output targets
At 96 kHz 148 maximum
At 48 kHz 244 maximum
Line (XLR) 16
Dante 32 (96 kHz), 64 (48 kHz)
Expansion cards 2 × 32 (96 kHz), 2 × 64 (48 kHz)
USB audio 32
Monitor output (analogue) 2 (1 × stereo)
Built-in recorder 2 (1 × stereo)
Inserts
Analogue insertion points 2 (Mic/Line inputs 15–16)
Digital signal processing
Mixing engine 54-bit floating-point, 96 kHz
A/D converters 32 bit, 96 kHz
D/A converters 24 bit, 96 kHz
Digital I/O sampling rate 96 kHz, 48 kHz
Analogue audio inputs and outputs
Mic/Line inputs (balanced, MIC/LINE) XLR-3-31 (1: GND, 2: HOT, 3: COLD)
Maximum input level +12 dBu (TRIM at minimum, Pad off)
+32 dBu (TRIM at minimum, Pad on)
Minimum input level –62 dBu (TRIM at maximum, Pad off)
–42 dBu (TRIM at maximum, Pad on)
Input impedance ≥5 kΩ
Line inputs (balanced, LINE IN (BAL)) 6.3-mm standard TRS jacks
(Tip: HOT, Ring: COLD, Sleeve: GND)
Maximum input level +12 dBu (TRIM at minimum, Pad off)
+32 dBu (TRIM at minimum, Pad on)
Minimum input level –62 dBu (TRIM at maximum, Pad off)
–42 dBu (TRIM at maximum, Pad on)
Input impedance ≥5 kΩ
Inserts (INSERT) 6.3-mm standard TRS jacks
(Tip: HOT, Ring: COLD, Sleeve: GND)
Maximum input level (Return) +18 dBu
Nominal input level (Return) –2 dBu
Input impedance (Return) ≥5 kΩ
Maximum output level (Send) +18 dBu
Nominal output level (Send) –2 dBu
Output impedance (Send) ≤100 Ω
Talkback input (TALKBACK) XLR-3-31 (1: GND, 2: HOT, 3: COLD)
Maximum input level +10 dBu
Minimum input level –65 dBu
Gain adjustment range 0–55 dB
Input impedance ≥5 kΩ
Phantom power +48 V available
Stereo inputs (ST IN 1-2 L/R) RCA pin jacks
Maximum input level +6 dBV (1.995 Vrms)
Nominal input level –10 dBV (0.316 Vrms)
Headroom 16 dB
Input impedance ≥10 kΩ
Line outputs (OUTPUT 1–16) XLR-3-32 (1: GND, 2: HOT, 3: COLD)
Maximum output level (selectable) +15 dBu (Ref(D): –9 dBFS, Ref(A): +6 dBu)
+18 dBu (Ref(D): –14 dBFS, Ref(A): +4 dBu)
+20 dBu (Ref(D): –16 dBFS, Ref(A): +4 dBu)
+18 dBu (Ref(D): –18 dBFS, Ref(A): 0 dBu)
+20 dBu (Ref(D): –20 dBFS, Ref(A): 0 dBu)
+22 dBu (Ref(D): –18 dBFS, Ref(A): +4 dBu)
+24 dBu (Ref(D): –20 dBFS, Ref(A): +4 dBu)
Nominal output level (selectable) +6 dBu (Ref(D): –9 dBFS)
+4 dBu (Ref(D): –14 dBFS, –16 dBFS)
+4 dBu or 0 dBu (Ref(D): –18 dBFS, –20 dBFS)
Output impedance ≤100 Ω
Monitor outputs (MONITOR OUT L/R) XLR-3-32 (1: GND, 2: HOT, 3: COLD)
Maximum output level +24 dBu
Nominal output level +4 dBu
Output impedance ≤100 Ω
Headphones outputs (PHONES) 6.3-mm standard stereo jack,
3.5-mm stereo mini jack
Maximum output power 100 mW + 100 mW (32 Ω load, when connected to only one jack)
Digital audio inputs and outputs
USB audio USB Type-B
Input (USB to Sonicview) 32 channels
Output (Sonicview to USB) 32 channels
Sampling rates 48 kHz, 96 kHz
Bit depth 32 bit
Dante PRIMARY/SECONDARY etherCON Cat5e compatible
Number of audio channels 64 channels (48 kHz)
32 channels (96 kHz)
Supported modes Redundant mode, Switched mode
Compatible standard Gigabit Ethernet (1000BASE-T, IEEE 802.3ab)
Recommended cables Cat5e STP or better
Control inputs and outputs
GPIO 25-pin D-sub (8-in/8-out, female, inch-standard)
Input circuit Pull-up (5 V)
Output circuit Open collector
Output impedance: 10 Ω
Voltage resistance: 20 V
Maximum output current: 35 mA
Maximum supply current (+5 V) 50 mA
Footswitch connector (FOOTSWITCH) 6.3-mm standard TS jack (Tip: HOT, Sleeve: GND)
Network connector (ETHERNET) RJ45
Compatible standards 100BASE-TX, 1000BASE-T
Protocol TCP/IP
Wordclock input (WORD IN) BNC
Input level 0.5–5 Vpp
Input impedance 75 Ω ±10% (termination on)
Input frequency 48 kHz, 96 kHz
Permissible frequency deviation ±100 ppm
Wordclock output (WORD THRU/OUT) BNC
Output level TTL level (5 V)
Output frequency 48 kHz, 96 kHz
USB port (top panel) 4-pin USB Type-C (for keyboard and mass storage)
Standard USB 2.0 High Speed (480 Mbit/s)
Bus power 5 V, 0.5 A
Classes HID, mass storage
USB port (rear panel) USB Type-B (for audio interface, dedicated driver required)
Standard USB 2.0 High Speed (480 Mbit/s)
Power output for lamp (LAMP) XLR 4-pin female (pin 4: +12V, pin 3: GND)
Power supply voltage DC 0–12 V (adjustable brightness)
Maximum output power 5 W
Audio performance
Mic amp EIN (equivalent input noise) ≤–128 dBu
Frequency response (Mic/Line input to Line output) 20 Hz – 40 kHz: +0 dB, –1.0 dB (JEITA)
Dynamic range ≥108 dB (Mic/Line input to Line output, PAD off, TRIM min., Ref(D) –20 dBFS, internal word clock, JEITA)
≥110 dB (Mic/Line input to Dante output, PAD off, TRIM min., internal word clock, JEITA)
≥112 dB (Dante input to Line output, PAD off, TRIM min., internal word clock, JEITA)
Distortion ≤0.002 % (Mic/Line input to Line output, +4 dBu input signal, PAD off, TRIM min., JEITA)
≤0.002 % (Mic/Line input to Dante output, +4 dBu input signal, PAD off, TRIM min., JEITA)
≤0.002 % (Dante input to Line output, 0 dBFS input signal, JEITA)
Crosstalk ≥–100 dB (Mic/Line input to Line output, 1 kHz sine wave, JEITA)
0 dBu = 0.775 Vrms / Ref(D): Digital Reference Level
System requirements for connected computers
USB audio interface 64-bit Windows- or Mac-compatible computer with a USB 2.0 (or higher) port
Remote control 64-bit Windows- or Mac-compatible computer with network access, Apple iPad
Supported operating systems see the separate section above
Recorder/Player specifications (with optional IF-MTR32 expansion card installed)
Storage media SDHC cards (8–32 GB, Class 10 or better)
SDXC cards (64–128 GB, Class 10 or better)
USB flash drives (8–128 GB, playback only)
Note: A list of SD cards that have been confirmed for use with this unit can be found on our web site.
File systems SDHC card, USB storage: FAT32
SDXC card, USB storage: exFAT
Recording/playback formats
WAV/BWF Recording: 48 kHz, 96 kHz, 24 bit, 2 channels
Playback: 48 kHz, 96 kHz, 16/24 bit, 2 channels
MP3 Playback: 44.1 kHz, 48 kHz, 32–320 kbit/s
AAC Playback: 44.1 kHz, 48 kHz, 64–320 kbit/s
Power supply and other specifications
Main displays 3 7-inch (17,8 cm) colour touchscreens, 800 × 480 px
Channel displays 3 monochrome LC displays, 384 × 68 px
Mains power AC 100–240 V, 50/60 Hz
Power consumption 85 W
Overall dimensions (width × height × depth) 691 mm × 228 mm × 554 mm
Weight 18 kg
Permissible operating temperature range 0–40 °C

Downloads

ดาวน์โหลด Firmware & All Docs Sonicview 24

สินค้าที่เกี่ยวข้อง