ลดราคา!
rupert_neve_designs_portico_5045_3

RUPERT NEVE DESIGNS PORTICO 5045 Primary Source Enhancer

RUPERT NEVE DESIGNS

เครื่องปรับแต่งเสียง Rupert Neve Designs Portico 5045 On-Stage Stereo Feedback Reducer, Easy-to-Set up Controls, Threshold, Depth & Time Constant Knobs, Allows for Louder Mics in Concert

Original price was: 115,000 ฿.Current price is: 86,200 ฿.

ราคาสินค้าไม่รวมภาษีมูลค่าเพิ่ม
หมวดหมู่: ป้ายกำกับ:

คำอธิบาย

Rupert Neve Designs Portico 5045 Primary Source Enhancer

เครื่องปรับแต่งเสียง Rupert Neve Designs Portico 5045 On-Stage Stereo Feedback Reducer, Easy-to-Set up Controls, Threshold, Depth & Time Constant Knobs, Allows for Louder Mics in Concert

The Rupert Neve Designs 5045 Primary Source Enhancer is a two-channel device that tames acoustic feedback in a manner similar too, but not exactly like, a gate. As such, you can use it to help boost the level of microphones in a live performance setting before feedback occurs, all without adding obvious tonal coloration.

The device sports easy-to-use controls. A Threshold control dictates the level at which the processor starts working, while the Depth parameter sets how much attenuation is applied below the threshold.

The Time Constant knob gives you access to six different attack and release speeds—twelve, actually, when you consider that the RMS/Peak switch changes the behavior of this parameter. With these minimal controls, you can easily set the processor to suppress anything below the signal’s optimal range.

The 5045 takes line-level from mic preamp outputs or insert sends of consoles and delivers a line-level signal that can easily feed a console or PA. Because of transformer coupling on the I/O path, the unit can interface with a wide variety of gear. It offers XLR connections on the input and output paths.

Features:

  • An ideal way to remove unwanted background noise from your audio
  • Provides 2 channels of clean signal for greater gain without risking feedback
  • Functions similarly to a noise gate but operates on a more discerning principle
  • Automatically detects when direct sound is present for perfect reaction time
  • Straightforward controls are extremely easy to use for ultra-fast results

Specifications

Threshold Continuously Variable from -20 to 10 dBu
Depth Continuously Variable from 0 to 20 dBu
Time Constants RMS Mode:
RMS Mode Time Constant Data Collected Using 10 dB Bursts
A: 50 ms
B: 100 ms
C: 200 ms
D: 750 ms
E: 1.5 Seconds
F: 3 SecondsPeak Mode:
Attack: 20 ms, Fixed
Release:
A: 20 ms
B: 200 ms
C: 1 Second
D: 2 Second
E: 5 Second
F: 30 Seconds
Maximum Output Level +25 dBu
THD & Noise Main Output, Feedback Suppressor Bypassed: < 0.002% @ 1 kHz, +20 dBu Output Level, No Load
Main Output, feedback Suppressor Engaged: < 0.002% @ 1 kHz, +20 dBu Output Level, No Load
Noise Feedback Suppressor Bypassed: < -100 dBu @ Main Output, Unweighted, 22 Hz to 22 kHz, 50-Ohm Terminated Input
Feedback Suppressor Engaged: < -95 dBu @ Main Output, Unweighted, 22 Hz to 22 kHz, 50-Ohm Terminated Input
Frequency Response Main Output @ 20 Hz: -3 dB
Main Output @ 150 kHz: -3 dB
Crosstalk Measured Channel to Channel: < – 80 dB @ 16 kHz
Power Requirements 12 VDC Input, 1 A
Dimensions Not Specified by Manufacturer
Weight Not Specified by Manufacturer

Downloads

ดาวน์โหลด Manual PORTICO 5045

Video