ลดราคา!
rupert-neve-designs5012h_5

ไมค์ปรีแอมป์ RUPERT NEVE DESIGNS PORTICO 5012 DUO MIC PREAMP

ไมค์ปรีแอมป์ Neve 5012 2-Channel Microphone Preamp มีทั้งแบบแนวตั้ง 5012-V (Vertical) และแบบแนวนอน 5012-H (Horizontal) เพื่อสะดวกสำหรับการใช้งานแต่ละสถานที่โดยมีคุณสมบัติที่เหมือนกัน

 

66,950 ฿

ราคาสินค้าไม่รวมภาษีมูลค่าเพิ่ม

หมวดหมู่: ป้ายกำกับ:

รายละเอียดเพิ่มเติม

Rupert Neve Designs Portico 5012 Duo Mic Preamp

ไมค์ปรีแอมป์  Neve 5012  2-Channel Microphone Preamp มีทั้งแบบแนวตั้ง 5012-V (Vertical)  และแบบแนวนอน 5012-H (Horizontal) เพื่อสะดวกสำหรับการใช้งานแต่ละสถานที่โดยมีคุณสมบัติที่เหมือนกั

The Portico 5012 is a dual channel mic pre featuring Rupert Neve’s custom input and output transformer designs. In addition to individually selectable phase, mute, phantom power and a fully sweepable high pass filter, the 5012 incorporates a “Silk” circuit which yields the rich warmth and presence of his renowned classics.

Features:

  • Dual-Channel Microphone Preamplifier
  • Silk Circuit
  • Continuously Sweepable High-Pass Filter
  • Connect to Multiple Buss Modules
  • Mute Button
  • Phantom Power
  • Phase Button

rupert-neve-designs5012h_7

Silk

Much could be written about this feature, suffice to say, that it gives a subtle option to enhance sound quality in the direction of vintage modules. The Silk button reduces negative feedback and adjusts the frequency spectrum to provide a very sweet and musical performance. We suggest you try it and make your own judgment.

Level Meter

-30 dBu to +22 dBu With reference to the output

Mute

Cuts of the output signal post metering and pre Buss Output. Be sure to mute the outputs before engaging phantom power.

High Pass Filter

The High pass filter is a valuable aid in any signal chain but particularly so in a microphone preamplifier. Signals between 20 and 250 Hz can be attenuated, leaving the range above this unaffected. This gets rid of building rumble, air handling motor hum etc.

Phantom Power

Provides 48V phantom power to microphones

Buss Output

The To Buss output is unbalanced and has a high impedance output. It is intended for use with the Portico Buss Amp/Monitoring modules. A TRS patch cord is used to connect the 5012 Buss output to one of these bussing modules. The Monitor connection is derived pre mute on the 5012 and will produce a signal at the output of the buss modules that is equal in level to that at the 5012 output. The Monitor output cannot be used for any other purpose.

Polarity

Flips the phase of an incoming source 180 degrees

Specifications

Rupert Neve Designs 5012

Connectors 2 x balanced XLR microphone connectors2 x balanced XLR connectors

4 x 1/4″ TRS bussing module connectors

Frequency Response Main Output, no load-0.2 dB at 10 Hz

-3 dB at 160,000 Hz

Buss output measured at the 5014 monitor Buss-Mix Amplifier Output

-0.2 dB at 10 Hz

-3 dB at 160,000 Hz

Noise Measured at Main Output, unweighted, 22 to 22,000 HzTerminated 150Ω

With gain at unity: better than -100 dBu

With gain at 66 dB: better than -62 dBu

Equivalent Input Noise: better than -128 dBu

Noise Factor: 1.5 dB

High-Pass Filter Continuously variable swept frequency from 20 to 250 Hz
Slope: 12 dB/octave
Gain Unity to 66 dB in 6 dB stepsTrim continuously adjustable from -6 to 6 dB
Buss I/O Output is designed to feed the 5014 Monitor Buss mix amplifier at the internal system level of -2.5 dBuOutput level of the 5014 is equal to that of the 5012
Maximum Output Level Maximum Output from 20 to 40,000 Hz: 25 dBu
Mute Mutes main output only
Total Harmonic Distortion/Noise At 1,000 Hz: 20 dBu outputMain Output: better than 0.001%

Buss Output measured at the 5014 monitor buss-mix amplifier output: better than 0.002%

At 20 Hz, 20 dBu output

Main Output: better than 0.002%

Silk Engaged: better than 0.2% second harmonic

Crosstalk Measured channel to channel: better than -90 dB at 15,000 Hz
Phantom Power +48 VDC ±1%
Power Requirements Voltage range: 9 to 18 VDCCurrent Consumption:

At 9 VDC, current is 1.3 A typical: Power= 11.7W

At 12 VDC, current is 1.0 A typical: Power= 12.0W

At 15VDC, current is 0.8 A typical: Power= 12.0W

At 18VDC, current is 0.65 A typical: Power= 11.7W

Dimensions (LxHxD) 9 x 1.75 x 8.5″ (22.86 x 4.45 x 21.6 cm)
Weight 8 lb (3.6 kg)
Packaging Info
Package Weight 8.15 lb
Box Dimensions (LxWxH) 14.0 x 12.3 x 5.6″

Downloads

ดาวน์โหลด MANUAL Rupert Neve Designs Portico 5012