ลดราคา!
rode_ai1_usb_ausio-interface

ออดิโออินเตอร์เฟส RODE Ai1 USB Audio Interface

RODE

USB ออดิโออินเตอร์เฟส Rode AI-1 High-Speed USB-C Audio Interface, 96 kHz / 24-Bit, Premium Discrete Headphone Amplifier, Single Combo XLR-1/4″ Input, Phantom Power, Two 1/4″ Monitor Outputs, Zero-Latency Monitoring, พร้อมโปรแกรม Ableton Live Lite

4,425 ฿

ราคาสินค้าไม่รวมภาษีมูลค่าเพิ่ม
หมวดหมู่: ป้ายกำกับ:

รายละเอียดเพิ่มเติม

Rode AI-1 Studio-Quality USB Audio Interface

USB ออดิโออินเตอร์เฟส Rode AI-1 High-Speed USB-C Audio Interface, 96 kHz / 24-Bit, Premium Discrete Headphone Amplifier, Single Combo XLR-1/4″ Input, Phantom Power for Condenser Microphones, Two 1/4″ Monitor Outputs, Zero-Latency Monitoring, พร้อมโปรแกรม Ableton Live Lite

ออดิโออินเตอร์เฟส  RODE AI-1 เป็นอุปกรณ์เชื่อมต่อทาง USB คุณภาพระดับสูดิโอ ใช้ได้ทั้ง PC และ Mac, RODE AI-1 มีภาค Preamp แบบคลาส A สามารถช่วยเปลี่ยนโปรแกรมบันทึกเสียงที่คุณใช้ปกติให้เป็นระบบการบันทึกเสียงแบบ STUDIO เต็มรูปแบบ ด้วยหัวพ่วงต่อ Neutrik Combo ที่สามารถใช้ได้ทั้งหัวแบบ XLR และแบบ PHONE Jack TS, ช่วยให้คุณต่อ ไมค์ หรือ เครื่องดนตรี หรือ สัญญาณเสียง กับคอมพิวเตอร์ของคุณเพื่อการบันทึกเสียงได้สะดวก โดยมีคุณภาพการแปลงสัญญาณสูงสุดที่ 24bit/96kHz

RODE AI-1 ยังสามารถใช้เล่น Playback และ Monitor ได้ทั้งตรงจากไมค์ หรือ ผ่านเครื่องเล่นจากซอฟท์แวร์ โดยสามารถฟังเสียงผ่านทาง Headphone amplifier คุณภาพสูง


The AI-1 USB Audio Interface adds studio-quality Input and Output capabilities to your PC or Mac, turning your recording software into a full recording setup. With its high quality Neutrik XLR-1/4” Combo Jack combined input and discrete Class-A preamp, the AI-1 allows you to connect a microphone or instrument or line level audio signal to your Mac/Windows computer for recording. The AI-1 provides the necessary A/D conversion at up to 24 bit/96kHz.

The AI-1 also allows playback and monitoring of audio either direct from the microphone or via playback from the recording software. This is done via a high-quality discrete headphone amplifier and outputs via either the ¼’’ headphone output on the front of the unit or the balanced ¼’’ outputs on the rear of the unit.

System Requirments: 

Apple
• MacOS 10.10 or later with USB 2.0 or 3.0 USB port
Windows
• Windows 7 OS or later with USB 2.0 or 3.0 USB port

Features:

  • Desktop USB audio interface with low-noise Class-A discrete preamplifier
  • Sampling rate of up to 96kHz/24-bit
  • One combo XLR-1/4″ combo input
  • Two balanced 1/4″ monitor outputs
  • One discrete, studio-quality headphone output
  • Phantom power for condenser microphones
  • Zero-latency monitor mode
  • USB bus powered
  • USB Type-C connector for future proof operation
  • Rugged body with Satin Black Finish, Class compliant—no drivers required
  • Includes Ableton Live Lite, Includes USB cable

Specifications

Analog Inputs and Outputs Input: 1 x Neutrik XLR-1/4″ / 6.35 mm combo
Outputs: 2 x 1/4″ / 6.35 mm (impedance balanced), 1 x 1/4″ / 6.35 mm (headphones)
Computer Connectivity USB Type-C
Form Factor Desktop
Mic Preamps 1
Phantom Power Yes
Bit Depth 24-bit
Sample Rates 44.1, 48, 88.2, 96 kHz
Zero-Latency Direct Monitoring Yes
USB Bus Powered Yes
OS Requirements Mac OS X 10.10 or later
Windows 7 or later
Dynamic Range 104 dBu
Equivalent Noise Equivalent Input Noise at Maximum Gain: -128 dBA (source impedance 150 ohms, 20 Hz to 20 kHz, A-weighted)
Frequency Response 20 Hz to 20 kHz (better than ±1 dB, measured after ADC)
Gain Range 0 to 45 dB
Input Impedance XLR Mic Input: 1.3 kOhms
Instrument Input: 0.9 MOhms
Monitor Outputs Max Output Level: -6 dBu
Headphone Output Max Output Power (at 1% THD):
32 Ohms, 24 mW,
300 Ohms, 245 mW
Dimensions (D x W x H) 3.9 x 4.9 x 1.5″ / 100.0 x 124.0 x 38.0 mm
Weight 19.8 oz / 561.3 g

Downloads

ดาวน์โหลด Data Sheet, User Guide RODE AI-1

ดาวน์โหลด Manual RODE AI-1 

ดาวน์โหลด Set Up RODE AI-1 Video

Video