radial_relay_xo_switcher

สวิชเชอร์ Radial Relay Xo Active Output Switcher

สวิชเชอร์ Radial Relay Xo, is an audio switcher designed to route balanced mic or line-level signals between two separate destinations, with the ability to be operated remotely with an optional JR-1 footswitc

10,900 ฿

ราคาสินค้าไม่รวมภาษีมูลค่าเพิ่ม

หมวดหมู่: ป้ายกำกับ:

รายละเอียดเพิ่มเติม

Radial Relay Xo Balanced Remote Output Switcher

สวิชเชอร์ Radial Relay Xo, is an audio switcher designed to route balanced mic or line-level signals between two separate destinations, with the ability to be operated remotely with an optional JR-1 footswitch

Radial Relay Xo Designed to address on-stage communication problems for artists who employ in-ear monitoring systems, the Relay Xo is a remotely controlled active switcher that enables artists on stage to quickly reroute their signal without disrupting the performance.

Connect the output of a dynamic microphone or wireless receiver to the Relay Xo input, then feed output-A to the PA system, and output-B to a common intercom buss. As soon as the Relay Xo is switched, it cuts the signal feeding the PA and redirects it to the monitoring system, allowing the musician to discreetly speak with other band members or the crew.

Features:

  • Redirects mic signal to communicate with techs
  • Allows artist to speak with musicians and techs
  • Remote controllable with optional footswitch
  • Link output to switch multiple units at once

Specifications

Audio circuit type Remotely controlled mechanical relay
Frequency response 10Hz ~ 100kHz
Dynamic range >140dB
Gain 0dB
Total harmonic distortion <0.0005%
Intermodulation Distortion 0.001%
Input Impedance Source dependent
Output Impedance Source dependent
Common Mode Rejection Ratio -106dB
Noise -115dBu
Maximum Input +26dBu
Features
Ground lift
Input Connectors XLR-F input
Output Connectors 2 XLR-M outputs
Extras Combo (XLR-F & ¼” ) and ¼” loop-through remote connectors;
Contact Closure Function: With ¼” TRS jack, short tip and ground to switch With XLR,
short pin-1 ground and pin-2 Hot to switch
General
Construction 14 gauge steel with internal I-beam
Size (L x W x D) 5″ x 3.3″ x 1.8″ (127mm x 84mm x 45.5mm)
Weight 1.4 lbs (0.6kg)
Shipping size (L x W x D) 6.5″ x 4″ x 3″ (165mm x 102mm x 76mm)
Shipping weight 2.4lbs (1.08 kg)
Power 15VDC, 30mA, center-pin (+)
Conditions For use in dry locations only between 5°C and 40°C
Warranty Radial 3-year, transferable

Downloads

ดาวน์โหลด Manual Radial Relay Xo

ดาวน์โหลด Smartsheet Radial Relay Xo