radial_js3_microphone_splitter

สปริตเตอร์ Radial JS3 Microphone Splitter

สปริตเตอร์แยกสัญญาน Radial JS3, is a high performance balanced mic-level splitter designed to send a signal to multiple destinations simultaneously, with two transformer-isolated outputs and one direct output

11,900 ฿

ราคาสินค้าไม่รวมภาษีมูลค่าเพิ่ม

หมวดหมู่: ป้ายกำกับ:

รายละเอียดเพิ่มเติม

Radial JS3 Passive 3-way Microphone Splitter

สปริตเตอร์แยกสัญญาน Radial JS3, is a high performance balanced mic-level splitter designed to send a signal to multiple destinations simultaneously, with two transformer-isolated outputs and one direct output

The JS3 is a professional mic splitter designed to split a single source to multiple destinations simultaneously without signal degradation or noise. A premium Jensen transformer inside provides galvanic isolation to eliminate buzz and hum from ground loops, while maintaining an extremely wide bandwidth with ultra-low distortion and phase shift.

Ground lifts on the outputs help further reduce noise, while an input pad allows line-level sources to connected as well. Both the JS2 and the JS3 can be rack mounted for touring and installation purposes, with up to eight fitting in the Radial J-Rak.

Features:

  • Send one microphone signal to three destinations simultaneously
  • Jensen transformer-equipped for exceptional audio quality
  • Eliminates hum and buzz caused by ground loops
  • Dual isolated outputs provide optimal noise rejection

Specifications

Audio circuit type Passive mic/line splitter, transformer based
Transformer JT-MB-DPC, 1:1:1 ratio
Number of channels Three-way splitter (one in/three out)
Frequency response 20Hz ~ 20KHz (+0dB/ -2dB)
Dynamic range 140dB
Total harmonic distortion 0.0005% @ 1kHz
Phase Deviation 0.7° @ 100Hz; 2.8° @ 20Hz
Input Impedance 2.4k Ohms, unbalanced
Output Impedance 2.4k Ohms, unbalanced
Maximum Input +25dBu @ 1kHz
Features
Input pad, Ground lift
Input Connectors XLR-F in
Output Connectors Two isolated outputs
General
Construction 14-gauge steel chassis & outer shell
Size (L x W x D) 3.3″ x 5.0″ x 2″ (84 x 127 x 48mm)
Weight 1.55lb (0.7kg)
Shipping size (L x W x D) 4″ x 3″ x 6.5″ (102 x 76 x 165mm)
Shipping weight 1.92lb (0.87kg)
Power Passive, no power required
Conditions For use in dry locations only between 5°C and 40°C
Warranty Radial 3-year, transferable

Downloads

ดาวน์โหลด Manual Radial JS3

ดาวน์โหลด Data sheet Radial JS3