radial_hdi_direct_box

ไดเร็คบ๊อกซ์ Radial HDI High Definition Studio DI

Radial

ไดเร็คบ๊อกซ์ Radial HDI Studio Direct Box, designed to give you the colorful tone, Blend from ultra-clean to amp-like distortion, Smooth Opto compressor for peak reduction, Mic and line-level outputs, Oversized custom-wound Jensen transformer

34,600 ฿

ราคาสินค้าไม่รวมภาษีมูลค่าเพิ่ม
หมวดหมู่: ป้ายกำกับ:

รายละเอียดเพิ่มเติม

Radial HDI DI Box with Color Control & Opto Compressor

ไดเร็คบ๊อกซ์ Radial HDI Studio Direct Box, designed to give you the colorful tone, Blend from ultra-clean to amp-like distortion, Smooth Opto compressor for peak reduction, Mic and line-level outputs, Oversized custom-wound Jensen transformer

The Radial Engineering HDI is a direct box designed to give you the colorful tone you want as quickly as possible. Use it on passive or active electric basses, electric guitars, or any mono instrument you wish to inject directly into the mixing console or house PA.

The HDI offers some of the connections you’d typically find on a DI box, such as a 1/4″ to XLR I/O path with a 1/4″ thru jack for outputing unaffected sound to an onstage amplifier.

However, these have been expanded: you’ll note the 3.5mm input for synths and auxiliary signals, a 1/4″ processed output, and dedicated XLR outputs for mic and line signals.

Notably, the unit shines in the color options it provides. You’ll find a Color control that offers subtle harmonic distortion not dissimilar to tube amplifiers; you can drive this control with the Level knob.

Also, an Opto circuit with a fixed 6:1 ratio musically smoothes your levels. A high-pass filter can cut some of the lows out of your colored sound, eliminating mud from the harmonic distortion and leaving the unprocessed signal unaltered. Finally, a presence knob adds midrange grit to your signal. An IEC power cord is included.

Features:

  • Dial in an amazing tone within seconds
  • Blend from ultra-clean to amp-like distortion
  • Smooth Opto compressor for peak reduction
  • Mic and line-level outputs
  • Oversized custom-wound Jensen transformer

Specifications

Frequency Response Line Output: 1 Hz to ∼ 100 kHz (+0.25/-3 dB), 20 Hz to ∼ 20 kHz (±0.1 dB)
Mic Output: 10 Hz to ∼ 80 kHz (+0.25/-3 dB)
Dynamic Range 112 dB (20 Hz to 20 kHz, Unweighted, Referred to +25 dBu)
Gain Range Min Gain (Level CCW): -3 dB
Max Gain (Level CW): +31 dB
THD 0.3% at 20 Hz, 0.22% at 100 Hz, 0.01% at 1 kHz (+4 dBu In)
Signal to Noise 91 dB (20 Hz to 20 kHz, Unweighted, Referred to +4 dBu)
Max Input 1/4″ TS: +5 dBu, 3 VAC RMS, 8.4 Vpp
1/8″ / 3.5mm: +25 dBu, 7 VAC RMS, 20 Vpp (Level at 12:00)
Max Output Line-Level XLR: +25 dBu (1% THD at 1 kHz)
Mic-Level XLR: +3.7 dBu (1% THD at 1 kHz)
1/4″ Processed Out: +8 dBu (Approximately, Unity Gain with Level at 12:00)
Input Connectors 1/4″ TS (Front and Rear), 1/8″ / 3.5 mm Synth
Output Connectors XLR Line/Mic, 1/4″ TS Processed, 1/4″ TS Thru
Compressor Optical, 6:1 Ratio, 8 dB Gain Reduction Max
HPF 40 Hz / 100 Hz Rolloff at -6 dB/Octave
Construction 14 Gauge Steel Chassis, 0.5″ / 12.7 mm Aluminum Front Panel
Power 100 to 200 VAC, 50/60 Hz, 0.45 A
Operating Temperature 41 to 104°F / 5 to 40°C
Dimensions (L x W x D) 8.3 x 8.3 x 3.5″ / 209.6 x 209.6 x 88.9 mm
Weight 5.1 lb / 2.3 kg

Downloads

ดาวน์โหลด Data Sheet Radial HDI

Video