ลดราคา!

เพาเวอร์แอมป์ QSC ISA800Ti Stereo Power Amplifier

Name: เพาเวอร์แอมป์ QSC ISA800Ti Stereo Power Amplifier
Brand: QSC
SKU: 42901
Availability: InStock

เครื่องขยายเสียงกลางแจ้ง (เพาเวอร์แอมป์) QSC ISA800TI มีกำลังขับ 450 วัตต์ x 2 ที่ 8 โอหม์, 800 วัตต์ x2 @ 70 or 100 Volt, Built-in 70V transformer with 25, 70, 100V, DataPort V2 HD-15 connector for use with DPV2-compatible external signal processing

Original price was: 63,000 ฿.Current price is: 53,550 ฿.

ราคาสินค้าไม่รวมภาษีมูลค่าเพิ่ม

สอบถามและสั่งซื้อสินค้า Order FAQS

หมวดหมู่: เพาเวอร์แอมป์ ป้ายกำกับ: QSC Brand: QSC

คำอธิบาย

QSC ISA800Ti Stereo Power Amplifier with 70V Transformer (450W @ 8 ohms)

The QSC ISA800Ti is a 3RU rackmount power amplifier, equipped with an internal 70V transformer and designed specifically for sound contractors as a low impedance solution rated for 2-ohm operation at 1200W per side, or 450W per Channel at 8 ohms. The versatile loading options, feature set and protection circuitry, in addition to the built-in HD-15 DataPortV2 DSP interface capability, ensures a high-value, cost-effective solution for budget-minded installations.

The ISA800Ti is housed in a rugged all-metal chassis, and features rear panel gain controls for tamper resistant operation with 2dB detents for quick and repeatable settings. The inputs include both XLR and detachable Euro-style connectors and the outputs feature covered barrier strip connectors for full safety agency compliance.

Features:

High output stereo power amplifier low-impedance contractor installation applications
Built-in 70V transformer with 25, 70, 100V and low-impedance outputs available simultaneously
Fully isolated 25, 70, and 100V outputs, barrier strip connection determines output mode
Rear panel gain controls for tamper resistant operation with 2 dB detents for quick and repeatable settings
DataPort V2 HD-15 connector for use with DPV2-compatible external signal processing accessories
Full short circuit, open circuit, thermal, ultrasonic and RF protection
Independent defeatable clip limiters for reduced distortion, selectable 30 Hz or 70 Hz high-pass filters protect speakers and prevent speaker transformer saturation
Front panel indicators include power, signal, and clip; Stereo, Bridge and Parallel operating modes
Automatic variable-speed fan for quiet normal operation with maximum cooling, rear-to-front air flow
XLR and detachable Euro style input connectors, covered barrier strip output connectors with full safety agency compliance

Specifications

Power Rating	8 ohms Stereo: 450W 4 ohms Stereo: 650W 2 ohms Stereo: 1200W XF Stereo 70V: 800W XF Stereo 25V: 500W Bridged 8 ohms: 1500W
Damping Factor	>200 @ 8 ohms
Input Sensitivity	1.07Vrms
Input Impedance	10 kOhm/20 kOhm (unbalanced/balanced)
Gain	33dB
Frequency Response	20Hz to 20kHz, +/-1dB
Signal-to-Noise Ratio	100dB (20 Hz – 20 kHz)
Total Harmonic Distortion (THD)	<0.03%, 4 and 8 ohms, 20 Hz – 20 kHz, 10 dB below rated power
Input Connections	2 x 3-pin XLR Female, Balanced 2 x 3-pin Detachable EuroBlock 1 x HD-15 DataPortV2
Output Connectors	2 x Covered Barrier Strips
Controls Front Panel	1 x Power Switch
Controls (Rear)	1 x 10-Position DIP Switch Set 2 x Ch.1, 2 Gain Knobs
Indicators	2 x Red Clip LED 2 x Green Signal LED 1 x Green Power LED
Cooling	Continuously variable speed fan, back-to-front air flow
Power Consumption	0.5A at idle 3.7A at 1/8 Power, 8 ohms 9.3A at 1/8 Power, 2 ohms
Dimensions	19 x 5.25 x 15.9″ (483 x 133 x 400mm)
Weight	42 lb (19 kg)
Specialties	Stable into reactive or mismatched loads Rear Panel Controls Comprehensive Protection Circuitry