ลดราคา!
QSC_isa1350_power_amplifier

เพาเวอร์แอมป์ QSC ISA1350 Stereo Power Amplifier

QSC

เครื่องขยายเสียงกลางแจ้ง (เพาเวอร์แอมป์) QSC ISA280 มีกำลังขับ 800 วัตต์ x 2 ที่ 8 โอหม์, 1300 วัตต์ x 2 ที่ 4 โอหม์, High output stereo low-impedance, DataPort V2 HD-15 connector for use with DPV2-compatible external signal processing, Automatic variable-speed fan

Original price was: 100,000 ฿.Current price is: 85,000 ฿.

ราคาสินค้าไม่รวมภาษีมูลค่าเพิ่ม
หมวดหมู่: ป้ายกำกับ:

คำอธิบาย

QSC ISA1350 Stereo Power Amplifier 800W into 8 ohms

เครื่องขยายเสียงกลางแจ้ง (เพาเวอร์แอมป์) QSC ISA280 มีกำลังขับ 800 วัตต์ x 2 ที่ 8 โอหม์, 1300 วัตต์ x 2 ที่ 4 โอหม์, High output stereo low-impedance, DataPort V2 HD-15 connector for use with DPV2-compatible external signal processing, Automatic variable-speed fan

The QSC ISA-1350 is a 3RU rackmount power amplifier designed specifically for sound contractors as a low impedance solution rated for 2-ohm operation at 2000 watts per side, or 800 watts at 8 ohms. The versatile loading options, feature set and protection circuitry, in addition to the built-in HD-15 DataPortV2 DSP interface capability, ensures a high-value, cost-effective solution for budget-minded installations.

The ISA-1350 is housed in a rugged all-metal chassis, and features rear panel gain controls for tamper resistant operation with 2dB detents for quick and repeatable settings. The inputs include both XLR and detachable Euro-style connectors and the outputs feature covered barrier strip connectors for full safety agency compliance.

Features:

  • High output stereo power amplifier low-impedance contractor installation applications
  • Rear panel gain controls for tamper resistant operation with 2 dB detents for quick and repeatable settings
  • DataPort V2 HD-15 connector for use with DPV2-compatible external signal processing accessories
  • Full short circuit, open circuit, thermal, ultrasonic and RF protection
  • Independent defeatable clip limiters for reduced distortion, selectable 30Hz or 70Hz high-pass filters protect speakers and prevent speaker transformer saturation
  • Front panel indicators include power, signal, and clip; Stereo, Bridge and Parallel operating modes
  • Automatic variable-speed fan for quiet normal operation with maximum cooling, rear-to-front air flow
  • XLR and detachable Euro style input connectors, covered barrier strip output connectors with full safety agency compliance

Specifications

Power Rating Stereo @ 2 ohms: 2000W per channel
Stereo @ 8 ohms: 800W per channel
Bridged @ 8 ohms: 2800W
Damping Factor >250 @ 8 ohms
Input Sensitivity 1.24 Vrms @ 8 ohms
Input Impedance 10 kOhm/20 kOhm (unbalanced/balanced)
Gain 36.1dB
Frequency Response 20Hz to 20kHz, +/-1dB
Signal-to-Noise Ratio 100dB (20 Hz – 20 kHz)
Total Harmonic Distortion (THD) <0.03%, 4 and 8 ohms, 20 Hz – 20 kHz, 10 dB below rated power
Input Connections 2 x 3-pin XLR Female, Balanced
2 x 3-pin Detachable EuroBlock
1 x HD-15 DataPortV2
Output Connectors 2 x Covered Barrier Strips
Controls Front Panel 1 x Power Switch
Controls (Rear) 1 x 10-Position DIP Switch Set
2 x Ch.1, 2 Gain Knobs
Indicators 2 x Red Clip LED
2 x Green Signal LED
1 x Green Power LED
Cooling Continuously variable speed fan, back-to-front air flow
Power Consumption 1.3A at idle
6.2A at 1/8 Power, 8 Ohms
14.0A at 1/8 Power, 2 ohms
Dimensions 19 x 5.25 x 15.9″ (483 x 133 x 400mm)
Weight 68 lbs (30.8 kg)
Specialties Drives 70V Lines Directly with 1500W/Ch. Output
Rear Panel Controls
Comprehensive Protection Circuitry
Packaging Info
Package Weight 81.5 lb
Box Dimensions (LxWxH) 24.0 x 22.0 x 8.5″

Downloads

ดาวน์โหลด User Manual เพาเวอร์แอมป์ QSC ISA1350

ดาวน์โหลด Specifications Sheet เพาเวอร์แอมป์ QSC ISA1350