ลดราคา!
qsc_gxd8

เพาเวอร์แอมป์ QSC GXD8 Professional Power Amp

เครื่องขยายเสียงกลางแจ้ง (เพาเวอร์แอมป์) QSC GXD8 มีกำลังขับ 1500 วัตต์ x2 @ 8 โอหม์, 4500W Max Power Output, Matched for 4 Ohm and 8 Ohm Speakers, Efficient Class-D Power Amplifier, Built-In DSP Speaker Processor, High & Low-Pass Filters with 4-Band EQ

40,800 ฿

ราคาสินค้าไม่รวมภาษีมูลค่าเพิ่ม

หมวดหมู่: ป้ายกำกับ:

รายละเอียดเพิ่มเติม

QSC GXD 8 Professional 4500W Power Amplifier with DSP

เครื่องขยายเสียงกลางแจ้ง (เพาเวอร์แอมป์) QSC GXD8 มีกำลังขับ 1500 วัตต์ x2 @ 8 โอหม์, 4500W Max Power Output, Matched for 4 Ohm and 8 Ohm Speakers, Efficient Class-D Power Amplifier, Built-In DSP Speaker Processor, High & Low-Pass Filters with 4-Band EQ

The GDX 8 from QSC is a professional power amplifier designed for professional PA systems utilizing speakers with 4 and 8 ohm loads and a maximum output of 4500W. The GDX 8 employs a class D output stage with a universal power supply for high performance and efficiency, while keeping the unit lightweight at 13.2 lbs. The integrated DSP section includes High and Low-Pass filters (24 dB LR), 4-band parametric equalizer, signal alignment delay, and RMS/Peak speaker protection limiting.

The parallel XLR and 1/4″ TRS input connectors offer broad compatibility with convenient loop-through capabilities, while the professional binding posts and NL4 connector provide mono and bi-amped speaker connections.

In addition to the limiting offers on the inputs and outputs, the GDX employs smart speaker protection by providing settings for the loudspeaker’s continuous output and impedance (4 ohm or 8 ohm). The GDX 8 ships with a standard IEC power cord.

Features:

  • High peak output power with up to 4500W
  • Power levels matched to popular loudspeakers and optimized for maximum headroom into 4-ohm and 8-ohm speaker systems
  • Class-D output stage with a universal power supply for high performance and efficiency
  • Extensive built-in loudspeaker processing, includes high & low-pass filters, 4-band PEQ, limiting, and delay
  • Large LCD display simplifies amplifier setup and indicates amp status
  • Inputs: Parallel XLR and 1/4” TRS connectors for compatibility with any source while providing convenient loop-thru capability
  • Precision rotary encoders for gain and DSP parameter control
  • Outputs: Professional binding post and NL4 connectors (compatible with NL2) provide for mono and bi-amp speaker connections
  • Digital Limiting automatically protects the amplifier from damage due to temperature rise or overdrive
  • Adjustable speaker protection to match your loudspeaker’s power and impedance Front panel LEDs indicate signal presence, input overload, and amplifier clipping

Specifications

Watts Per Channel 8 Ohm Dynamic (Both Channels Driven): 1500 W 
4 Ohm Dynamic (Both Channels Driven): 2250 W 
8 Ohm Continuous (Both Channels Driven): 800 W
4 Ohm Continuous (Both Channels Driven): 1200 W
Total Harmonic Distortion (THD) Distortion: < 1% (typical), 1 kHz at full rated power
Signal to Noise Ratio Signal to Noise: 100 dB, (A-weighted, 20 Hz to 20 kHz)
Input Sensitivity 1.2 Vrms
3.9 Vrms
Voltage Gain 36.5 dB
Output Circuit Class D
Power Requirements Power Requirements: 1/8 power at 4 ohms

100 VAC: 6.2 A
120 VAC: 5.6 A
230 VAC: 3.2 A

Frequency Response 20 Hz to 20 kHz (+0.7 dB, -0.8 dB)
Headroom Dynamic Headroom: 2.73 (4 ohms)
Damping Factor 100
Input Impedance 20 kOhms (balanced)
10 kOhms (unbalanced)
Maximum Input Level +23.5 dBu
Input Connectors 3-pin XLR/F
1/4″ TRS, balanced
Output Connectors NL4 (Channel 1 – 1+/-, Channel 2 – 2+/-), binding posts
Amplifier Protection Short circuit
Open circuit
Thermal
RF protection
Load protected against DC faults
Front Panel Controls and Indicators 2 x rotary encoders
3 x operational buttons (HOME, ENTER, EXIT)
2 x green signal LEDs, indicate signal presence
2 x red A/D clip LEDs, indicate input over-drive and/or amplifier current clipping
Blue power LED ring, AC on
256 x 128 Pixel LCD: 2.1 x 1.0″ / 5.4 x 2.5 cm
Digital Signal Processing (DSP) High Pass Filter: 4th order LR, adjustable frequency 20 Hz to 4 kHz
Low Pass Filter: 4th order LR, adjustable frequency 60 Hz to 4 kHz
4-Band PEQ: Variable frequency, gain, and bandwidth
Peak Limiter: Power, aggressiveness, and impedance selection
Delay: 50 ms maximum
Approvals UL, CE, RoHS/WEEE compliant
Dimensions (H x W x D) 3.5 x 19.0 x 10.2″ / 8.9 x 48.3 x 25.9 cm
Weight 13.2 lb / 6.0 kg
Packaging Info
Package Weight 19.05 lb
Box Dimensions (LxWxH) 23.386 x 14.409 x 5.984″

Downloads

ดาวน์โหลด Datasheet Manual เพาเวอร์แอมป์ QSC GXD8

ดาวน์โหลด Datasheet Specs เพาเวอร์แอมป์ QSC GXD8