ลดราคา!
peavey_cs4000_power_amplifier

เพาเวอร์แอมป์ PEAVEY CS4000 Power Amplifier

PEAVEY

เครื่องขยายเสียงเพาเวอร์แอมป์ Peavey CS4000 มีกำลังขับ 800 วัตต์ RMS x  2 ที่ 8 Ohms, 1350 วัตต์ RMS x 2 ที่ 4 Ohms, 2000 วัตต์ RMS x 2 ที่ 2 Ohms, ตอบสนองความถี่ 10Hz-100kHz

Original price was: 47,600 ฿.Current price is: 32,000 ฿.

ราคาสินค้าไม่รวมภาษีมูลค่าเพิ่ม
หมวดหมู่: ป้ายกำกับ:

คำอธิบาย

Peavey CS4000 Power Amplifier 800 x 2W at 8 Ohms

เครื่องขยายเสียงเพาเวอร์แอมป์ Peavey CS4000 มีกำลังขับ 800 วัตต์ RMS x  2 ที่ 8 Ohms, 1350 วัตต์ RMS x 2 ที่ 4 Ohms, 2000 วัตต์ RMS x 2 ที่ 2 Ohms, ตอบสนองความถี่ 10Hz-100kHz, Inputs: XLR/TRS Combo Jacks, Outputs: Banana Terminals and NL4 Speakon

The Peavey CS Series Amplifiers are the global standard bearer for workhorse reliability. These rackmount amps benefit from Peavey’s most popular audio innovations, including exclusive DDT compression/anticlipping protection. The CS 4000 circuitry protects against shorts, improper loads, abrupt turn-on levels, high temperatures, and subsonic frequencies that could damage loudspeakers. All CS power amps include toroidal power transistors for lighter weight and increased power.

Features:

  • Two temperature-dependent variable speed fans
  • 2000W RMS per channel at 2Ω
  • 1350W RMS per channel at 4Ω
  • 800W per channel at 8Ω
  • 4000W at 4Ω bridged
  • Two-rack-space stereo power amp featuring DDT (Distortion Detection Technique)

Specifications

Rated Power Bridged 4,000 W @ 1 kHz at <0.1% T.H.D. @ 4 Ω
Rated Power
  • 2 x 2 Ω: 2,000 W per channel @ 1 kHz <0.1% T.H.D. both channels driven
  • 2 x 4 Ω: 1,350 W per channel @ 1 kHz at <0.05% T.H.D. both channels driven
  • 2 x 8 Ω: 800 W per channel @ 1 kHz at <0.05% T.H.D. both channels driven
  • 1 x 2 Ω: 2,550 W @ 1 kHz at <0.1% T.H.D.
  • 1 x 4 Ω: 1,600 W @ 1 kHz at <0.05% T.H.D.
  • 1 x 8 Ω: 900 W @ 1 kHz at <0.05% T.H.D.
Minimum Load Impedance 2 Ω
Maximum RMS Voltage Swing 93 V
Frequency Response 10 Hz – 100 kHz; +0, -2 dB at 1 W
Power Bandwidth 10 Hz – 35 kHz; +0, -3 dB at rated 4 Ω power
THD
  • 2 x 2 Ω: <0.2% @ 1,500 W per channel from 20 Hz – 20 kHz
  • 2 x 4 Ω: <0.1% @ 1,150 W per channel from 20 Hz – 20 kHz
  • T2 x 8 Ω:<0.1% @ 750 W per channel from 20 Hz – 20 kHz
Input CMRR > – 75 dB @ 1 kHz
Voltage Gain x 40 (32 dB)
Cross Talk > -70 dB @ 1 kHz at rated power @ 8 Ω
Hum & Noise > -108 dB, “A” weighted referenced to rated power @ 8 Ω
Slew Rate > 15 V / us
Damping Factor (8 Ω) > 500:1 @ 20 Hz – 1 kHz
Phase Response +5° to – 12° from 20 Hz – 20 kHz
Input Sensitivity 1.84 V +/- 3% for 1 kHz 4 Ω rated power, 1.58 V +/- 3% for 1 kHz 2 Ω rated power
Input Impedance 15 kΩ, balanced
Current Draw
  • At 1/8 power: 1,825 W @ 2 Ω, 1,185 W @ 4 Ω, 720 W @ 8 Ω
  • At 1/3 power: 4,535 W @ 2 Ω, 2,975 W @ 4 Ω, 1,835 W @ 8 Ω
Cooling Two back panel temperature dependent variable speed 80 mm DC fans
Controls 2 front panel attenuators, rear panel mode switches
Indicator LEDs 2 DDT (clip limiting), 2 signal presence, 2 active status
Protection Thermal, DC, turn-on bursts, subsonic, incorrect loads
Input Connectors Input A: combi XLR and 1/4″ (6.3 mm) phone Input B: combi XLR and 1/4″ (6.3 mm) phone
Output Connectors Output A: speakon and binding post speaker Output B: speakon and binding post speaker
Construction 14 galvanized steel with cast front panel and cast handles
Dimensions (H x W x D) 3.5 x 19 x 4.81 + 1.25″ (89 x 483 x 376 + 32 mm) for rear support ears and connectors
1.5″ (38 mm) for handle depth
Weight 43.3 lb (19.64 kg)

Downloads

ดาวน์โหลด Manual เพาเวอร์แอมป์ PEAVEY CS4000

ดาวน์โหลด Cut Sheet เพาเวอร์แอมป์ PEAVEY CS4000