martin-audio_dx40_processor

โปรเซสเซอร์ Martin Audio DX4.0 Networked Loudspeaker Processor

MARTIN AUDIO

ดิจิตอลโปรเซสเซอร์ Martin Audio DX 4.0, 4-in-8-out Networked Loudspeaker Processor, Controller and Matrix, Analogue, AES3 and Dante™ digital audio inputs, High performance 96kHz DSP, FIR optimisation for Martin Audio’s O-Line

150,000 ฿

ราคาสินค้าไม่รวมภาษีมูลค่าเพิ่ม
หมวดหมู่: ป้ายกำกับ:

คำอธิบาย

Martin Audio DX4.0 4-in-8-out Networked Loudspeaker Processor

ดิจิตอลโปรเซสเซอร์ Martin Audio DX 4.0, 4-in-8-out Networked Loudspeaker Processor, Controller and Matrix, Analogue, AES3 and Dante™ digital audio inputs, High performance 96kHz DSP, FIR optimisation for Martin Audio’s O-Line

The Martin Audio DX4.0 is an advanced loudspeaker controller and system matrix with four input and eight output channels. Class-leading sonic performance is achieved by state-of-the-art audio converters and DSP algorithms, with a 96kHz sampling frequency delivering a nominally flat response beyond 40kHz.

Four analogue/AES3 inputs and eight analogue/AES outputs are available, with AES3 inputs and outputs selected in pairs. Dante™ digital audio networking is also provided for digital audio distribution and control, with automatic fall back to analogue or AES3. By converting analogue or AES audio to Dante, the DX4.0 provides ‘on-ramp’ entry to digital audio networking.

The DX4.0 features a sophisticated loudspeaker limiter suite which incorporates peak, RMS and excursion limiting, as well as multiband limiting for passive two-way systems. High-pass filtering, three shelving filters and six parametric filters are provided for each input channel, with crossover filters, two shelving filters and eight parametric filters on each output channel.

The DX4.0 supports FIR filters for use with optimisation of Martin Audio’s O-Line and can also be used with Martin Audio’s U-Hub to feed digital audio and network to an MLA Series array/subwoofer array via a single cable.

Features:

  • Four input channels and eight output channels loudspeaker processor and matrix
  • Analogue, AES3 and Dante™ digital audio inputs
  • High performance 96kHz DSP
  • Remote control and monitoring over Ethernet via Martin Audio VU-NET software
  • FIR optimisation for Martin Audio’s O-Line
  • VX limiting allows a passive enclosure the same protection as a fully active unit.
  • Comprehensive suite of EQ’s, delays and all pass filters.
  • Global mains operation 100-240V, 50-60Hz

Specifications

General
Type 4 input/8 output digital loudspeaker processor
Operating Temperature 0 to 45°C
Humidity Range 0 to 80% RH (non-condensing)
Audio Performance
Input Impedance >10kΩ balanced
Output Impedance <100Ω balanced
Max Input Level +20dBu
Max Output Level +18dBu into 600Ω
Frequency Response 10Hz – 40kHz
Input Dynamic Range >120dBa typ.
Output Dynamic Range >118dBa typ.
Total Harmonic Distortion <0.008% typ. 20Hz-20kHz
Digital Signal Processing
Sample Rate 96kHz
Aes3 Input Sample Rate 28kHz – 108kHz
Aes3 Output Sample Rate 96kHz
Power Supply
Ac Operating Range 100-240V +/-10%
Power Consumption 30W
Control And Monitoring
Protocol Ethernet
Control Application Martin Audio VU-NET™
Connectors
Audio Input 4 x 3 pin female XLR for analogue or AES3 pairs
Audio Output 8 x 3 pin male XLR for analogue or AES3 pairs
Ethernet 1 x shielded RJ45
Dante™ Network 2 x shielded RJ45, primary and secondary
Aux Port Phoenix connector for contact closure
Mains Power 3 pin IEC
Physical
Dimensions (W) 482mm x (H) 1U/44mm x (D) 184mm
(W) 19in x (H) 1U/1.75in x (D) 7.2in
Weight 2.7Kg (6lbs)

 

Downloads

ดาวน์โหลด Data Sheet Martin Audio DX4.0