Music Space (Thailand)

Member

สินค้า

lab-gruppen_lucia60-2m_amplifiers

เพาเวอร์แอมป์ LAB GRUPPEN LUCIA 60/2M Power Amplifier

LAB GRUPPEN

เครื่องขยายเสียง LAB GRUPPEN LUCIA 60/2M,Incorporates Ease Of Install With 2 x 30 W into 8, 4 or 2 ohms, 4 x 4 mix matrix – Route input signals, Per channel presets for high-pass filter, parametric EQ, delay and look-ahead limiter

23,000 ฿

ราคาสินค้าไม่รวมภาษีมูลค่าเพิ่ม
หมวดหมู่: ป้ายกำกับ:

คำอธิบาย

LAB GRUPPEN LUCIA 60/2M Power Amplifier 2×30 watt

เครื่องขยายเสียง LAB GRUPPEN LUCIA 60/2M,Incorporates Ease Of Install With 2 x 30 W into 8, 4 or 2 ohms, 4 x 4 mix matrix – Route input signals internally to either or both amplifier channels, Per channel presets for high-pass filter, parametric EQ, delay and look-ahead limiter

The innovative LUCIA® 60/2M (Localized Utility Compact Intelligent Amplification) from Lab.Gruppen dellivers superior audio performance and extraordinary versatility in a decentralized approach to AV systems design, offering power, processing, control and I/O conveniently placed exactly where they’re needed. In many AV applications requiring consistent, high quality audio output, LUCIA offers a logical, cost-efficient, and scalable solution, eliminating eliminates the complications and added expense of a centralized equipment room for amplification, matrixing, and processing. All LUCIA-series amplifiers incorporate a digital, firmware-controlled front end coupled to a robust, durable, and highly-efficient Lab.gruppen output stage, all of which make it the best sounding compact amplifier in its class.

LUCIA amplifiers offer quick and easy installation using the included wall-mount bracket, enabling discreet on-wall placement behind video displays. All connections use Euroblock screw terminals, and level-setting is easily done with front-panel potentiometers. An advanced protection scheme helps protect the the amplifier and connected loudspeakers against potential damage from clipping, thermal overload, or extreme low line voltage.

It also includes a versatile 4 x 4 mix-matrix and comprehensive DSP, eliminating the need for external mixers and processors in many applications, saving time and money. Quick set-up is facilitated by a software wizard, while the PC editor allows offline configuration of common presets that can be quickly downloaded to multiple units via USB.

Features:

  • Maximum output power across range of loads – 2 x 30 W into 8, 4 or 2 ohms
  • Comprehensive DSP features – Per channel presets for high-pass filter, parametric EQ, delay and look-ahead limiter
  • Automatic Dynamic Loudness Contouring™ – DSP automatically adapts to optimize performance at any output level
  • Optimized presets – Available for specific loudspeaker models
  • Auto Load Sense™ – Proprietary auto-set VPL™ (Voltage Peak Limiter) for optimum performance with any connected load
  • 4 x 4 mix matrix – Route input signals internally to either or both amplifier channels
  • Configuration software – Windows and Mac software wizard for initial set-up, and advanced editor for preset configuration (LUCIA connection via USB)
  • RS232 – Remote control and monitoring from third party control solutions
  • GPIO – Remote control (e.g. wall panel) for channel switching, level control and integration with paging systems
  • Compact form factor – Half-rack, 1U chassis and supplied bracket for discreet on-wall mounting (e.g. behind display screens)
  • Efficient Class D amplifier – Patented design for low distortion and minimal heat dissipation
  • Fail-safe operation – Comprehensive short circuit, thermal, and under-voltage protection
  • Universal power supply – Operates at 100 – 240 V AC (50 or 60 Hz)
  • ENERGY STAR® qualified – Conforms to latest specification energy efficiency standard
  • Intelligent fan control – Silent operation at idle and at lower output levels

Specifications

General
Number of amplifier channels 2
Max total output all channels driven 60 W
Max output voltage per channel 21.9 V peak
Max output current per channel 3.9 Arms
Max output power (all channels driven)
2 ohms 30 W
4 ohms 30 W
8 ohms 30 W
16 ohms 15 W
Performance
THD 20 Hz – 20 kHz at 1 W into 8 ohms <0.3%
THD at 1 kHz and 1 dB below clipping <0.2%
Signal to Noise Ratio >95 dBA
Channel separation (Crosstalk) at 1 kHz >60 dBA
Frequency Response 5 Hz – 22 kHz
Input impedance 10 kOhm
Common Mode Rejection (CMR) 40 dB
Gain, Sensitivity and Limiters
VPL for 16 ohm mode 21.9 V peak
VPL for 8 ohm mode 21.9 V peak
VPL for 4 ohm mode 15.5 Vpeak
VPL for 2 ohm mode 11 Vpeak
Sensitivity, balanced input 4 dBu / 1.23 Vrms
Sensitivity, RCA input -2 dBu / 0.62 Vrms
Input headroom for clip, balanced 1 12 dBu / 3.09 Vrms
Input headroom for clip, RCA 1 6 dBu / 1.55 Vrms
Connectors and Buttons
Output connectors (per ch.) 2 – pin detachable screw terminals
Line-level output connectors (ch. 3 & 4) 3 – pin detachable screw terminals, electronically balanced
GPI (power control input) 2 2 channels of voltage sense type. 4 pins in a detachable screw terminal. Default for gain.
Input connectors (per ch.) 3 – pin detachable screw terminals, electronically balanced
Input connectors (ch. 1 & 2) Unbalanced RCA type
USB For firmware update and configuration with the Application Browser software
Level adjustment (per channel) Front panel potentiometer, detented from -inf to 0 dB
Processing Features
Input processing block 3 4 EQ sections per input
Mix matrix routing block 3 4 in – 4 out mix-matrix controllable from GPI
Output processing block 3 4 EQ sections per output (presets available for many loudspeakers)
User adjustable output look ahead limiter
ADLC (Adaptive ISO 226 compensation)
Two line level outputs 4 Each capable of driving 10 LUCIA devices in parallel
Latency from any input to any output User adjustable from 9.15 to 137 ms
Power
Nominal voltage 100 – 240 VAC
Operating voltage 85 – 265 VAC
Mains connector IEC inlet
Cooling One fan, no filter required, front to rear airflow, temperature controlled speed. Can stay off if the sustained power average stays below 2 × 6 W and the ambient temperature is below 25 C
Auto mode The power state is controlled automatically by the audio signal
Dimensions
Dimensions W: 216 mm (8.5”), H: 44 mm (1 U), D: 280 mm (11”)
Weight
Weight 1.9 kg (4.2 lbs)
Finish
Finish Black aluminum front and black steel chassis
Approvals
Approvals CE, CSA, CCC, PSE, FCC, Energy Star

NOTES

  • 1: An analog soft limit will be engaged on the input above this level to reduce the clip distortion
  • 2: Can be configured for different functionality such as RS232 via USB.
  • 3: DSP settings determined by settings downloaded from the Application Browser software; not configurable on the unit itself
  • 4: Noise levels typically allow daisy chaining of 3 LUCIA amplifiers without issues

Downloads

ดาวน์โหลด Data Sheet เพาเวอร์แอมป์ LAB GRUPPEN LUCIA 60/2M

ดาวน์โหลด All Document เพาเวอร์แอมป์ LAB GRUPPEN LUCIA 60/2M

Video

สินค้าที่เกี่ยวข้อง