ลำโพงสตูดิโอ GENELEC 8020C WM Studio Monitor 4″

Name: ลำโพงสตูดิโอ GENELEC 8020C WM Studio Monitor 4"
Brand: GENELEC
SKU: 29670
Availability: InStock

ลำโพงสตูมอนิเตอร์สำหรับห้องบันทึกเสียง Genelec 8020C WM สีขาว ขนาดลำโพง 4นิ้ว Woofer, 3/4นิ้ว Tweeter Bi-Amplified Active Monitor 20W Bass Amplifier, 20W Treble Amplifier

(Discontinued) ปัจจุบันเปลี่ยนรุ่นเป็น ลำโพงสตูดิโอ GENELEC 8020D WM 4″ Studio Monitor (New)

24,100 ฿

ราคาสินค้าเป็นราคาต่อใบ...และไม่รวมภาษีมูลค่าเพิ่ม

สอบถามและสั่งซื้อสินค้า Order FAQS

หมวดหมู่: ลำโพงห้องบันทึกเสียง ป้ายกำกับ: DISCONTINUED (ยกเลิกการผลิตหรือเปลี่ยนรุ่น) Brand: GENELEC

คำอธิบาย

Genelec 8020C WM (white color) 4″ Bi-Amplified Active Monitor 20W

ลำโพงสตูมอนิเตอร์สำหรับห้องบันทึกเสียง มีกำลังขยายในตัว Genelec 8020C WM สีขาว ขนาดลำโพง 4 นิ้ว Woofer, เสียงแหลม 3/4 นิ้ว Tweeter Bi-Amplified Active Monitor 20 วัตต์ Bass Amplifier, 20 วัตต์ Treble Amplifier

GENELEC 8020C White Color Active Two-Way 4″ Studio Monitor from Genelec provides an accurate reproduction of the source material in a compact design, which is best suited for use in small rooms and cramped work spaces. Its die-cast aluminum enclosure features a rounded shape, which minimizes distortions caused by edge diffraction. The metal dome tweeter is surrounded by a smoothly-shaped Directivity Controlled Waveguide, which helps to create an even response when listening both on and off axis.

The 8020C is built with Intelligent Signal Sensing (ISS) technology which automatically activates the speaker when an audio signal is detected, and puts it into Standby Mode when no signal is present, reducing the energy consumption to less than 0.5 watts.

The 8020C features a 20 watt high frequency amplifier for its 3/4″ tweeter, and a 20 watt low frequency amplifier for its 4″ woofer. The bass response is expanded by a rear-facing reflex port, and a separately available Genelec 7050B active subwoofer can be used to monitor a wider array of frequencies.

Features:

4″ Woofer, 3/4″ Tweeter
20W Bass Amplifier, 20W Treble Amplifier
Curved Edges Reduce Distortions
Wide On and Off Axis Response
Auto Switching to Standby Saves Power
Die-Cast Aluminum Enclosure
Iso-Pod Table Stand Reduces Vibration
Ideal for Small Spaces

Specifications

Cut-Off Frequency	Lower: ≤ 56 Hz at -6 dB Upper: ≥ 25 kHz at -6 dB
Frequency Response	62 Hz to 20 kHz (±2.5 dB)
SPL	≥ 100 dB SPL maximum (short-term sine-wave acoustic output on axis in half-space, averaged from 100 Hz to 3 kHz at 3.3′ / 1 m) 93 dB SPL maximum (long-term RMS acoustic output in the same conditions with IEC weighted noise (limited by driver protection circuit) at 3.3′ / 1 m)
Peak Output Capacity	≥ 107 db maximum peak acoustic output (per pair in listening room with music material at 3.3′ / 1 m)
Self-Generated Noise Level	≤ 5 dB (in free field at 3.3′ / 1 m on axis (A-weighted))
Harmonic Distortion	< 3% (at 85 dB SPL at 3.3′ / 1 m on axis, 50 to 200 Hz) < 0.5% (at 85 dB SPL at 3.3′ / 1 m on axis, higher than 200 Hz)
Drivers	Bass: 4″ / 105 mm cone Treble: ¾” / 19 mm metal dome Both drivers are magnetically shielded
Amplifier	Bass Amplifier Short-Term Output Power: 50 W Treble Amplifier Short-Term Output Power: 50 W Long-term output power is limited by driver protection circuitry
THD	≤ 0.05% at nominal output
Crossover Frequency	Bass/Treble: 3 kHz
Digital Controls	GLM Software Frequency Response Adjustment Parametric Notch Filters: 16x Shelving Filters: 2 x LF and 2 x HF System Room Response Calibration: Genelec GLM AutoCal, GLM manual, standalone
Mains Voltage	100 to 240 VAC 50/60 Hz
Power Consumption	Idle: 3 W Standby: < 0.5 W Full Output: 60 W
Analog Input	XLR female, balanced (pin 1 ground, pin 2 positive, pin 3 negative)
Input Level	-6 dBu at volume control max (for 100 dB SPL at 3.3′ / 1 m)
Input Impedance	10 kOhms
Sensitivity	-12 dB (constantly variable, control range relative to maximum output)
Controls	Treble Tilt Control (operating range): 0 to -2 dB at 15 kHz Desktop 200-Hz Control: -4 dB at 200 Hz Bass Roll-Off Control: 0 to -4 dB at 65 Hz
Analog Input	Maximum Analog Input Level: +24 dBu Analog Input Sensitivity: -6 dBu (100 dBSPL at 3.3′ / 1 m) Analog Input Sensitivity Control: Adjustable from +36 to -6 dBu
Dimensions (H x W x D)	9.5 x 6.0 x 5.6″ / 242.0 x 151.0 x 142.0 mm, Iso-Pod stand included 9.1 x 6.0 x 5.6″ / 230.0 x 151.0 x 142.0 mm, Iso-Pod stand excluded
Weight	7.0 lb / 3.2 kg