Music Space (Thailand)

Member

สินค้า

focusrite_rednet_mp8r

ปรีแอมป์ไมค์ Focusrite RedNet MP8R Mic Pre and A/D

Focusrite

ปรีแอมป์ไมค์พร้อมA/D for Dante Focusrite RedNet MP8R, 8 high-quality Focusrite mic preamps, remote-controllable from any computer on the RedNet network, 6-segment LED level meters; OLED display indicates input gain and system information

219,000 ฿

ราคาสินค้าไม่รวมภาษีมูลค่าเพิ่ม
หมวดหมู่: ป้ายกำกับ:

คำอธิบาย

Focusrite RedNet MP8R 8-Channel Remote-Controlled Mic Pre and A/D for Dante

ปรีแอมป์ไมค์พร้อมA/D for Dante Focusrite RedNet MP8R, 8 high-quality Focusrite mic preamps, remote-controllable from any computer on the RedNet network, 6-segment LED level meters; OLED display indicates input gain and system information

RedNet MP8R is an 8-channel remote-controlled microphone preamplifier and A/D for the Dante audio-over-IP network, designed specifically for the live sound/recording and broadcast environments, and other workflows where reliability is paramount, with Ethernet and power supply redundancy.

The MP8R features eight high-quality remote-controlled mic preamps developed specifically for the RedNet range, and backed by thirty years of mic preamplifier development. Each preamp has a dual input impedance of 10k or 2.4k ohms, allowing flexibility when running multiple mic pres in parallel.

The device includes eight auxiliary outputs with automatic DSP-based gain tracking for digital “splits”. Following the mic pres are eight channels of Focusrite’s legendary high-precision A/D converters, operating at up to 192kHz/24-bit with minimum latency and offering class-leading dynamic range and overall performance. The MP8R features a rugged, roadworthy exterior and high internal build quality. In addition, the unit offers a compact 1U rack-mount form factor.

Features:

  • Built-in redundancy with dual power and network connections
  • Rugged roadworthy all-metal construction, high build quality, locking power and etherCON Ethernet connectors
  • Eight Focusrite remote-controlled preamps with enhanced input level capability, and dual input impedance to deliver maximum performance when one mic feeds single or multiple pres
  • Two outputs from each preamp: one direct and the other automatically gain-compensated to deliver a constant level
  • Remote-controllable Gain, Phantom Power and High-Pass Filter from Yamaha CL and QL Series Consoles.
  • 20dB pad, HPF and polarity inversion per input
  • Operate locally, or remotely via RedNet Control software, Pro Tools, MIDI or OCA (Open Control Architecture – available 2015 via firmware update)
  • Precision low-latency conversion at up to 24-bit/192kHz, with best-in-class dynamic range and overall audio quality
  • 6-segment LED level meters; OLED display indicates input gain and system information
  • Compact 1U form factor
  • Full interoperability with other Dante products and networks
  • Comprehensive remote control software with powerful graphic user interface

Specifications

Microphone Inputs Specifications:
Gain Range: 0 to 55 dB in 1 dB steps
Type: Electronically balanced, Zin = 2.4/10 kOhms (switchable)
Maximum Input Level: 29 dBu ±0.5; minimum gain with pad for 0 dBFS, Rs = 150 ohms
Minimum Input Level: -46 dBu ±0.5; maximum gain without pad for 0 dBFS, Rs = 150 ohms
Frequency Response: 20 Hz to 55 kHz ±0.1 dB
THD + N: -98 dB (0.0012%) @ -1 dBFS, Rs = 150 ohms
EIN: -129 dBu ‘A’-Weighted (typical), Rs = 150 ohms
Signal-to-Noise Ratio: 118 dB ‘A’-Weighted (typical), Rs = 150 ohms
Phantom Power: +48 V, independently switchable per channel
Pad: -20 dB, independently switchable per channel
High Pass Filter: -6 dB @ 65 ± 3 Hz, 12 dB/Octave, independently switchable per channel
Crosstalk: < -100 dB, 20 Hz to 20 kHz; minimum input gain
Connectors (Rear Panel) 8 x XLR3 female analog audio microphone inputs
2 x etherCON locking Ethernet connectors (compatible with standard RJ45 connectors)
2 x IEC power inputs (with retaining clips)
Digital Performance Supported Sample Rates: 44.1, 48, 88.2, 96, 176.4, 192 kHz (-4, -0.1, +0.1, +4.167%) at 24 bit
Clock Sources: Internal or from network master device
Front Panel Controls Power on/off
Channel select buttons (1 to 8)
Illuminated Buttons: Info, 2.4/10 kOhm input impedance, 20 dB pad, +48 V Phantom Power, HPF, and Polarity
Gain setting knob
Indicators PSU A and PSU B power supply active LEDs
Network: Primary, Secondary, and Locked LEDs
Sample Rate: 44.1 kHz, 48 kHz, x2, x4 and Pull LEDs
8 x 6-segment level displays
Gain (dB) and status indication for selected channel via OLED display
Illuminated Buttons:
Info (displays device data on OLED panel)
2.4 kOhm input impedance
-20 dB, +48 V, HPF, and Polarity
Network Modes Redundant: Allows unit to connect two independent networks.
Switched: Connects both ports to integrated network switch, allowing daisy-chaining of devices.
PSU 2 x internal; IEC inputs, 100 to 240 VAC, 50/60 Hz
Apparent Power: 30 VA
Dimensions (H x W x D) 1.75 x 19 x 15.51″ (44.5 x 482.6 x 394 mm)
Weight 12.68 lb (5.75 kg)
Packaging Info
Package Weight 19.65 lb
Box Dimensions (LxWxH) 26.1 x 21.968 x 4.803″

Downloads

ดาวน์โหลด USER GUIDE, SOFTWARE, BROCHURE ปรีแอมป์ไมค์ Focusrite RedNet MP8R Mic Pre and A/D

สินค้าที่เกี่ยวข้อง