focusrite_rednet_d64r

Focusrite RedNet D64R MADI-Dante Bridge

Focusrite

Focusrite RedNet D64R, 64-Ch MADI-RedNet Bridge, with Redundant Power Supplies and Redundant Network Connections, Built-in redundancy with dual locking power and etherCON network connectors, Operates at standard sample rates between 44.1 kHz and 192 kHz

245,000 ฿

ราคาสินค้าไม่รวมภาษีมูลค่าเพิ่ม
หมวดหมู่: ป้ายกำกับ:

คำอธิบาย

Focusrite RedNet D64R 64-ch bridge between MADI and Dante Networks

Focusrite RedNet D64R, 64-Channel MADI-RedNet Bridge, with Redundant Power Supplies and Redundant Network Connections, Built-in redundancy with dual locking power and etherCON network connectors, Operates at standard sample rates between 44.1 kHz and 192 kHz

RedNet D64R provides the link between a Dante Ethernet-based audio system and any MADI / AES10 setup. D64R supports up to 64 channels of both coaxial and optical MADI interfaces and is completely bi-directional, allowing the use of any Dante components including RedNet’s high quality interface products with a MADI system – or MADI components with a Dante system. D64R features a sample rate converter (SRC) on each input and output allowing interfacing between MADI and Dante irrespective of the sample rate at which either system is operating.

Connect a Dante network to MADI-based digital consoles, computer cards, converters and much more. In addition to both coax and optical MADI interfaces, RedNet D64R provides Word Clock in and out. The D64R features a rugged, roadworthy exterior and high internal build quality, with Ethernet and power supply redundancy. In addition, it offers a compact 1U rack-mount form factor for a full 64 channels of I/O.

Features:

  • Connects a MADI system and a Dante network seamlessly together. Connect Dante to digital mixing consoles, interfaces and cards that use MADI; or extend a MADI system with RedNet’s versatile, superb-quality audio interfaces and connectivity – or any other Dante compatible devices.
  • Built-in redundancy with dual locking power and etherCON network connectors.
  • Supports both coax and optical interfaces – connect simply to any MADI equipment.
  • Slave either the Dante system or MADI streams to an external clock
  • Supports up to 64 channels of digital audio I/O at standard sample rates (44.1/48kHz) from a MADI system, 32 channels at 96kHz and 16 at 192kHz.
  • Sample rate conversion (SRC) on each input and output, allowing MADI and Dante systems to operate simultaneously at different sample rates.
  • Simple 1U rack-mount module with the classic red aluminium faceplate.
  • Comprehensive remote control software with powerful graphic user interface

Specifications

Connectors (Rear Panel) 2 x etherCON locking Ethernet connectors (compatible with standard RJ45 connectors)
2 x BNC Word Clock In and Out (with switchable 75 ohm termination on input)
2 x BNC MADI Coaxial In and Out
1 x Duplex-SC MADI Optical connector In and Out
2 x IEC power inputs (with retaining clips)
Channel Count Single Rate: 64 (56)
Double Rate: 32 (28)
Quad Rate: 16 (14)
Controls Power: on/off
Digital Performance Supported Sample Rates: 44.1, 48, 88.2, 96, 176.4, 192 kHz (-4, -0.1, +0.1, +4.167%) at 24 bit
Clock Sources: Internal, MADI, or from Dante Network Master
Ext. Word Clock Range: nominal sample rate ±7.5%
Sample Rate Conversion Lock Range: 41 to 216 kHz (MADI)
Gain Error: -0.01 dB
Sample Rate Ratio Limit: 6:1
THD: -130 dB (typical)
THD + N: < -130 dB (0.00003%); 0 dBFS input
Latency: 43 to 192 samples (sample rate dependent)
Dynamic Range: > 139 dB (-60 dBFS method)
MADI Clock Sources: RedNet, MADI Input, and Word Clock
MADI Coaxial Electrical Standard: as per AES10:2008
Connector: BNC 75 ohm
Recommended Cable: 75 ohm characteristic impedance
MADI Optical Optical Standard: as per AES10:2008 (ISO/IEC 9314-3, FDDI, ANSI X3.166)
Recommended Cable: multi-mode, graded-index, 62.5 µm core, 125 µm cladding
Connector: Duplex-SC (Single Mode available from manufacturer)
Indicators Green LED power indicator
Network Status: Primary/Secondary/Locked
PSU: A/B
Sample rate: 44.1/48 kHz, x 2, x 4, Pull
Clock Source: Internal, MADI, Word Clock
MADI Input: Coax, Optical, Auto
Clock Source: SRC, RedNet, MADI Input, Word Clock
Signal: In, Out, Varispeed
PSU 2 x internal; IEC inputs, 100 to 240 VAC, 50/60 Hz
Apparent Power: 30 VA
Dimensions (H x W x D) 1.75 x 19 x 12.13″ (44.5 x 482.6 x 308 mm)
Weight 9.52 lb (4.32 kg)
Packaging Info
Package Weight 13.65 lb
Box Dimensions (LxWxH) 23.8 x 17.1 x 4.6″

Downloads

ดาวน์โหลด USER GUIDE, SOFTWARE, BROCHURE Focusrite RedNet D64R MADI-Dante Bridge