d&b audiotechnik MAX2 Monitor Stage Monitor 15″ 250/1600W
ลำโพงสเตจมอนิเตอร์ d&b audiotechnik MAX2 เป็นลำโพงขนาด 15″ driver with ferrite magnet coaxial 1.4″ exit compression driver, passive crossover network, ทนกำลังขับ 250/1600 W (RMS/peak 10 ms) impedance 8 Ω, Dispersion 75° Max SPL 135 dB
The 2-way passive d&b audiotechnik MAX2 loudspeaker houses a 15” LF driver and a coaxially mounted 1.4” HF compression driver and achieves 75° conical constant directivity dispersion. The driver arrangement uses a single magnet assembly, allowing for a compact cabinet design with a low profile for strict visual demands.
The MAX2 provides a broad variety of deployment possibilities, whether used individually as a stage monitor; as a stand-alone full range system or, when combined with d&b subwoofers, as a drumfill.
The loudspeaker cabinet is constructed in marine plywood with an impact resistant paint finish. Four M10 threaded inserts allow connection to a flying bracket. The cabinet incorporates a pair of recessed grips for handling, while the front is protected by a rigid metal grill backed with an acoustically transparent foam. A pole mount is incorporated into one of the side panels. Two runners recessed in the bottom panel protect the cabinet from scratching and prevents movement.
- 2-Way Stage Monitor
- Components 15″ Driver With Ferrite Magnet Coaxial 1.4″ Exit Compression Driver
- Passive Crossover Network
- Power handling capacity (RMS/peak 10 ms) 250/1600 W
- Nominal Impedance 8 Ω
- Dispersion Angle (H X V) 75°
- Max SPL 135 dB
The recommended amplifiers for the MAX2 are the D20 and 30D. Alternatively, the MAX2 can be driven with using the MAX2 configuration within the D6, D80 or 10D amplifiers. The MAX2 may also be driven with any high quality linear power amplifier with an output not exceeding 800 Watts into 8 ohms and with an additional 25 Hz, 12 dB/octave subsonic filter.