ลดราคา!

เพาเวอร์แอมป์ CROWN XTI 1002 Power Amplifier

Name: เพาเวอร์แอมป์ CROWN XTI 1002 Power Amplifier
Brand: Crown
SKU: 37707
Availability: InStock

เครื่องขยายเสียงกลางแจ้ง CROWN XTi 1002 มีกำลังขับ Stereo Power @ 8 Ohms: 275W x2, Peak Plus Limiters, Subharmonic Synthesis, 3 User-Defined Fan Mode Controls, In-Depth DSP Processing, HiQnet Band Manager & System Architect

Original price was: 53,900 ฿.Current price is: 32,900 ฿.

ราคาสินค้าไม่รวมภาษีมูลค่าเพิ่ม

สอบถามและสั่งซื้อสินค้า Order FAQS

หมวดหมู่: เพาเวอร์แอมป์ ป้ายกำกับ: crown Brand: Crown

คำอธิบาย

CROWN XTI 1002 Power Amplifier

The Crown XTi 1002 Power Amplifier delivers up to 275W per channel at 8 ohms XTi 1002 is packed with Peak Plus Limiters that give you full control over threshold, attack, and release. What’s more, the Enhanced Subharmonic Synth section gives you control over frequency, gain, and filter type, so you can tune your XTi 1002 to your system.

Beyond that, there are three fan modes you can choose from – normal, early, and fullspeed so you can match the fan performance to your needs. Other noteworthy features include system monitoring for software visibility of AC line voltage and power supply temperature

Integrated cast-aluminum handles for easy handling and dependable durability, a locking power cord clip, high-tech control software, and 29 user-definable presets.

Bottom line? The XTi 2 series, including the XTi 1002, gives you an excellent solution for power amplification. Choose the one that best meets your power needs.

Features:

Stereo Wattage: 700W @ 2 ohms, 500W @ 4 ohms, 275W @ 8 ohms
Bridged Mono Wattage: 1000W @ 8 ohms, 1400W @ 4 ohms
Peak Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release
Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning
3 User-defined fan mode controls – normal, early and fullspeed – for matching fan performance to a specific application
New system monitoring provides software visibility of AC line voltage and power supply temperature
Integrated cast-aluminum handles for easy handling and enhanced durability
Locking power cord clip provides a secure connection between the amplifier and power cord
Updated HiQnet Band Manager and System Architect control software

Specifications

Output Power		700W @ 2 Ohms Stereo (per Channel) 500W @ 4 Ohms Stereo (per Channel) 275W @ 8 Ohms Stereo (per Channel) 1400W @ 4 Ohms Bridged-Mono 1000W @ 8 Ohms Bridged-Mono
Damping Factor		20Hz to 1kHz > 500
Input Sensitivity		1.4Vrms
Input Impedance		20k Ohms (Balanced) 10 kOhms (Unbalanced)
Gain		32.9dB @ 1kHz, 8 Ohm Rated Output
Frequency Response		(at 1 watt, 20Hz – 20kHz) +0dB, -1dB
Signal-to-Noise Ratio		XTi1002/2002/4002: 100dB (A weighted) XTi6002: 103dB (A weighted)
Total Harmonic Distortion (THD)		< 0.5%
Connections		Input Connectors: XLR, one per channel Link/Out Connector: Loop-thru signal from input connector for linking another amplifier, one per channel. Output Connectors: Two Neutrik Speakon NL4MP output connectors. Channel-1 Speakon is wired with Ch. 1 and Ch. 2 outputs for use with optional single 4-conductor cable. Two binding post outputs (in parallel with Speakon connectors). HiQnet USB Connector: Type B, connects to HiQnet network.
Controls Front Panel		Level: Two front-panel rotary level controls, one for each channel Power Switch: On/Off switch applies AC power to the amplifier Sel/Prev/Next Buttons: Three buttons near the LCD screen that are used to access menu items and front panel lockout LCD Screen: Backlit liquid crystal display that shows preset and processing status
Indicators		Signal Indicator: Green LED, one per channel, illuminates when a very low-level signal is present at input (may be used for troubleshooting cable runs). -10 Indicator: Green LED flashes when output signal exceeds -10 dB below clip.-20 Indicator: Green LED flashes when output signal level exceeds -20 dB below clip Ready Indicator: Green LED, one per channel, illuminates when the amplifier is ready to produce audio. Clip Indicator: Red LED, one per channel, turns on at the threshold of audible distortion Temp Indicator: Red LED, one per channel, illuminates under excessive temperature conditions Power Indicator: Blue LED illuminates when the amplifier has been turned on and has power
Cooling		Proportional speed fan with front-to-rear airflow.
Power Consumption		6.8A; no more than 38W at idle
Power Requirements		100 VAC, 120 VAC, 220-240 VAC 50/60 Hz
Dimensions		19 x 3.5 x 12.25″ (48.26 x 8.89 x 31.11cm)
Weight		18.5 lbs (8.4kg)
Specialties		DSP Includes EQ, Crossover Filters, Delay, and Subharmonic Synthesizer Protection for Short Circuits, Overloads, and Overheating
Packaging Info
Package Weight		22.0 lb
Box Dimensions (LxWxH)		22.5 x 19.0 x 7.0″