avantone_ck1_microphone

ไมโครโฟน AVANTONE PRO CK1 Pencil Microphone

AVANTONE PRO

ไมโครโฟนสำหรับบันทึกเสียง Avantone Pro CK1 Pencil Microphone, Interchangeable Capsule Design, Cardioid, Omni & Hypercardioid Capsules, Condenser Element & FET Output Stage, Pad Attenuation Switch: -10 dB, Includes SSM Shockmount, Padded Wooden Box, Cabernet Wine-Red Finish

7,700 ฿

ราคาสินค้าไม่รวมภาษีมูลค่าเพิ่ม
หมวดหมู่: ป้ายกำกับ:

รายละเอียดเพิ่มเติม

Avantone Pro CK-1 Small-Capsule FET Pencil Microphone

ไมโครโฟนสำหรับบันทึกเสียง Avantone Pro CK1 Pencil Microphone, Interchangeable Capsule Design, Cardioid, Omni & Hypercardioid Capsules, Condenser Element & FET Output Stage, Pad Attenuation Switch: -10 dB, Includes SSM Shockmount, Padded Wooden Box, Cabernet Wine-Red Finish

The CK-1 Small-Capsule FET Pencil Microphone from Avantone features a durable pencil microphone design with a Cabernet Wine-Red finish, nickel trim, and a black grille. It is suitable for capturing overheads (cymbals), acoustic instruments, amplifier cabinets, and vocals. The CK-1 offers an interchangeable capsule design and includes three condenser capsules with cardioid, omnidirectional and hypercardioid polar patterns.

The condenser capsules combined with an FET output stage provide clear detail and high-quality audio. There is a -10 dB pad (attenuation) switch and an 80 Hz high-pass filter switch for minimizing low-frequency noise. The microphone includes an SSM shockmount and a padded wooden carrying case

Features:

  • High grade polystyrene and metalized polypropylene capacitors in the signal path
  • The CK-1 includes three 3/4″ interchangeable capsules for a wide variety of miking possibilities
  • The SSM shockmount allows for precise positioning of the mic while inhibiting the transfer of unwanted vibrations
  • When miking high SPL sources, the -10 dB attenuation switch can be engaged to keep from overloading the electronics
  • The 80 Hz high-pass filter switch reduces rumble and unwanted low frequencies

Specifications

Transducer Condenser
Diaphragm 0.75″ (19 mm)
Polar Pattern Cardioid, Hypercardioid, Omnidirectional
Frequency Range 25 Hz to 20 kHz
Signal to Noise Ratio 78 dB
Equivalent Noise Level 17 dB A-Weighted
Maximum SPL 138 dB SPL 0.5%
Impedance 200 ohms
Sensitivity 15 mV/PA
Power Requirements 48 V
Low-Cut Filter Yes, 6 dB/Octave @ 80 Hz
Pad Yes, 10 dB
Output Connectors 3-Pin XLR
Operating Current Consumption 5.0mA
General
Length 6.02″ (153 mm)
Diameter 0.91″ (23 mm)
Weight 5.0 oz (142 g)
Packaging Info
Package Weight 2.95 lb
Box Dimensions (LxWxH) 8.9 x 6.7 x 3.6″