Music Space (Thailand)

Member

สินค้า

ลดราคา!
allen-hearth_dx164-w_stage_box

สเตจบ๊อก ALLEN & HEATH DX164-W Stage Box

ALLEN&HEATH

สเตจบ๊อก ALLEN & HEATH DX164-W เป็นชุดพ่วงต่อสำหรับเพิ่มจำนวนอินพุทและเอาท์พุทให้กับระบบสำหรับมิกเซอร์ดิจิตอล Allen&Heath, 16 balanced Mic Preamps on XLR, 4 balanced XLR Line Outs, Phantom Power LED per Input, 96kHz converters

Original price was: 116,600 ฿.Current price is: 93,200 ฿.

ราคาสินค้าไม่รวมภาษีมูลค่าเพิ่ม
หมวดหมู่: ป้ายกำกับ:

คำอธิบาย

Allen & Heath DX164-W 16 XLR Input / 4 XLR Output Wall Mount DX Expander

สเตจบ๊อก ALLEN & HEATH DX164-W เป็นชุดพ่วงต่อสำหรับเพิ่มจำนวนอินพุทและเอาท์พุทให้กับระบบสำหรับมิกเซอร์ดิจิตอล Allen&Heath, 16 balanced Mic Preamps on XLR, 4 balanced XLR Line Outs, Phantom Power LED per Input, 96kHz converters

The DX164-W is a wall or floor mount expander from Allen & Heath that is built for adding extra inputs & outputs to a dLive or SQ system. The DX164-W features 16 high end, low noise microphone preamps with independent phantom power LED indicators, accompanied by 4 analog line outputs on XLR.

Powered by 100-240V AC on IEC or screw terminals and / or a 12V DC power source (e.g. for redundancy) the DX164-W can be connected in redundant or cascade mode to fit any situation. A unique auto firmware matching feature keeps the DX164-W in sync with the rest of the dLive or SQ system.

Each DX164-W features 16 mic preamps with independent Phantom Power LED indicators, plus 4 XLR line outs. Up to 6 DX164-W units can be connected to a standard dLive system 4 via the MixRack and 2 via the Surface allowing up to 96 remote inputs and 24 remote outputs in addition to those provided by the MixRack and Surface. Further units can be added to a dLive system via a DX Link card or DX Hub.

The DX164-W connects via a single Cat5e cable to the dLive Surface, MixRack, DX Hub or upstream DX164-W / DX168 via a secure etherCON port. A second locking etherCON port is provided for redundant connection to compatible hardware, or for daisy-chaining to a downstream DX164-W or DX168 for additional remote I/O.

The Expander’s design allows for wall mount operation or, alternatively, installation in a stage “Dip Trap” making it suitable for fixed installations.

Features:

  • Designed for Wall Mount or Dip Trap installation
  • 16 balanced Mic Preamps on XLR
  • Phantom Power LED per Input
  • 4 balanced XLR Line Outs
  • Locking EtherCon ports
  • Daisy chain or redundant audio connection
  • Can fit in a standard NEMA box (custom brackets required)
  • Compatible with ACE Backstage 174SLBK stage pocket system
  • 3 power supply options: 100-230V AC powered on IEC or screw terminal blocks, as well as 12V DC power
  • DC power can be used as redundant power supply
  • 96kHz converters

Specifications

Mic/Line Xlr Inputs Balanced XLR, +48V phantom power
Mic/Line Preamp Fully recallable
Input Sensitivity -60 to +15dBu
Analogue Gain +5 to +60dB, 1dB steps
Pad -20dB Active PAD
Maximum Input Level +30dBu (PAD in)
Input Impedance >4kΩ (Pad out), >10kΩ (Pad in)
Mic EIN -127dB with 150Ω source
Analogue Xlr Outputs Balanced, Relay protected
Output Impedance <75Ω
Nominal Output +4dBu = 0dB meter reading
Maximum Output Level +22dBu
Residual Output Noise -92dBu (muted, 20-20kHz)
-90dBu (muted, 20-40kHz)
Operating Temperature Range 0°C to 35°C (32°F to 95°F)
Power
Mains Voltage Operating Range 100-240V AC, 50/60Hz
Mains Power Consumption 35W max
Dc Input 12V DC, 3A max
Dimensions And Weight Width x Depth x Height x Weight
Dx164-W 210 x 87 x 210 mm x 3.2kg
(8.25” x 3.5” x 8.25” x 7lbs)

Downloads

ดาวน์โหลด Data Sheet ALLEN & HEATH DX164-W

สินค้าที่เกี่ยวข้อง