se_electronics_se8_microphone

ไมโครโฟน sE Electronics sE8 Condenser Microphone

SE Electronics

ไมค์จ่อเครื่องดนตรี sE Electronics sE8 เป็นไมค์สำหรับจ่อเครื่องดนตรี ชนิดคอนเด็นเซอร์ มีรูปแบบการรับเสียงแบบ Cardioid Polar Pattern, Gold-Sputtered, Small-Diaphragm Condenser, ตอบสนองความถี่ 20 Hz to 20 kHz, Includes Mic Clip with Thread Adapter, Includes Windscreen

7,290 ฿

ราคาสินค้าไม่รวมภาษีมูลค่าเพิ่ม

คำอธิบาย

sE Electronics sE8 Small-Diaphragm Condenser Microphone ( Replacement sE5 )

ไมค์จ่อเครื่องดนตรี sE Electronics sE8 เป็นไมค์สำหรับจ่อเครื่องดนตรี ชนิดคอนเด็นเซอร์ มีรูปแบบการรับเสียงแบบ Cardioid Polar Pattern, Gold-Sputtered, Small-Diaphragm Condenser, ตอบสนองความถี่ 20 Hz to 20 kHz, Includes Mic Clip with Thread Adapter, Includes Windscreen

The sE Electronics sE8 is is a small-diaphragm condenser microphone with a hand-made, gold-sputtered cardioid capsule. Suitable for live and recording scenarios, the microphone has been engineered to provide a balanced, transparent, and natural sound, as well as a detailed transient response.

The sE8 boasts inherently low self-noise for capturing audio in particularly quiet situations. It also sports an SPL high enough to handle drums, and a dynamic range large enough to handle record triple-piano to triple-forte velocities accurately.

Two switchable pre-attenuation pads are on hand, should you encounter particularly loud sound sources; one will shave off 10 dB, while the other will attenuate 20 dB. You’ll also note a switchable low-pass filter that rolls off low end at either 80 Hz or 160 Hz at 6 dB per octave.

To enhance durability—and to reject electrical interference and noise—the sE8 sports an all-metal chassis. The gold-plated, 3-pin XLR connector ensures signal reliability for a long time to come. Handcrafted and hand-tuned, microphone comes with a mic clip, a thread adapter, and a windscreen.

Features:

  • 3-micron, gold-sputtered diaphragm Handcrafted, hand-tuned capsule
  • Precision electrode design for a linear, naturalistic response
  • Backplate design provides smooth, natural sound and consistent off-axis response
  • Electronic design provides low noise without the use of integrated circuits
  • Transformerless design for transparency and clarity
  • Class-A circuitry for a high dynamic range and transient response without distortion
  • -10 dB and -20 dB pads, enabling a wide range of applications and close-mic techniques for brass instruments, snare drums, and more
  • Low-pass filters, selectable between 80 Hz and 160 Hz
  • All-metal chassis provides efficient rejection of electrical interference and noise
  • Includes mic clip with thread adapter
  • Includes windscreen

Specifications

Sound Field Mono
Transducer Condenser
Tube No
Polar Pattern Cardioid
Frequency Range 20 Hz to 20 kHz
Signal to Noise Ratio Cardioid: 81 dB 
Equivalent Noise Level Cardioid: 13 dB A-Weighted
Maximum SPL Cardioid: 159 dB SPL Peak
Pad -10 dB
-20 dB
Impedance Cardioid: 110 Ohms
Load Impedance 1 kOhms 
Sensitivity Cardioid: 25 mV/Pa
Low-Cut Filter 6 dB/Octave @ 80 Hz
6 dB/Octave @ 160 Hz
General
Output Connectors 1 x 3-Pin XLR
Operating Current Consumption 2.7 mA
Operating Voltage 48 V
Length 4.72″ / 120 mm
Diameter 0.91″ / 23 mm
Weight 4.97 oz / 141 g

Downloads

ดาวน์โหลด Manual sE Electronics sE8

Video