radial_trim2_direct_box

ไดเร็คบ๊อกซ์ Radial Trim-Two Passive Stereo Direct Box

Radial

สเตอริโอไดเร็คบ๊อกซ์ Radial Trim-Two เป็น Di แบบ Passive Stereo พร้อมโวลุ่มคอนโทรล, For Line-Level Sources, Connects Laptops, Consumer Devices, Variable Volume Control, Choice of RCA, 1/4″ and 1/8″ connectors

7,500 ฿

ราคาสินค้าไม่รวมภาษีมูลค่าเพิ่ม
หมวดหมู่: ป้ายกำกับ:

คำอธิบาย

Radial Engineering Trim-Two Stereo DI with Volume Control

สเตอริโอไดเร็คบ๊อกซ์ Radial Trim-Two เป็น Di แบบ Passive Stereo พร้อมโวลุ่มคอนโทรล, For Line-Level Sources, Connects Laptops, Consumer Devices, Variable Volume Control, Choice of RCA, 1/4″ and 1/8″ connectors

The Trim-Two allows you to connect any playback device and interface it with balanced pro audio equipment without signal loss or hum and buzz from ground loops. It features two transformers which isolate and balance the audio output from your source device, eliminating noise and allowing you to use long cable runs without signal degradation.

A handy mono sum switch makes it easy to reduce the output channel count or send the same signal to two destinations at once, and an accessible level control gives you the ability to adjust levels in an instant. Multiple input connector types make it easy to hook up any consumer line level playback source, from laptops & smartphones to DJ equipment.

The completely passive design means that you never have to worry about powering the Trim-Two, making it truly plug & play.

Features:

  • Stereo direct box for line-level sources
  • Linear response from 30 Hz to 20 kHz
  • Easy access front panel volume control
  • Choice of RCA, 1/4″ and 1/8″ connectors

Specifications

Audio

Audio Circuit Type Passive, transformer based
Channels Dual Channel (Stereo)
Frequency Response 20 Hz to 20 kHz
Dynamic Range >100 dB
Maximum Input +20 dB @ 20 Hz
Total Harmonic Distortion 0.009%
Phase Deviation
Input Impedance 10 kOhms, unbalanced
Output Impedance 2.8 kOhms, balanced

I/O

Connectors 2x 1/4″ (6.3 mm) inputs
2x RCA (L, R) inputs
1x 1/8″ (3.5 mm) input
2x XLR-M (L, R) outputs
Transformer Custom
Shield Copper foil
Input Pad Switch Variable level control
Summing Mono Sum: Merges left + right sources to mono
Ground Lift Disconnects pin-1 @ both XLR outputs
XLR Configuration AES standard (pin-2 Hot)

General

Construction 14-gauge steel chassis & outer shell
Finish Durable powder coat
Power Passive, no power required
Operating Conditions For use in dry locations only between 41 to 104°F (5 and 40°C)
Dimensions (WxHxD) 3.3 x 5.0 x 2″ (84 x 127 x 48 mm)
Weight 1.55 lb (0.7 kg)

Packaging Info

Package Weight 1.715 lb
Box Dimensions (LxWxH) 6.35 x 4.35 x 2.95″

Downloads

ดาวน์โหลด Data Sheet Radial Trim-Two