radial_lx2_splitter_attenuator

สปริตเตอร์ Radial LX2 Line Level Splitter & Attenuator

สปริตเตอร์แยกสัญญาน Radial LX-2, passive balanced line-level audio splitter that allows you to easily send an audio signal to two different destinations at once without noise, while also providing the ability to attenuate the signal when needed

9,800 ฿

ราคาสินค้าไม่รวมภาษีมูลค่าเพิ่ม

หมวดหมู่: ป้ายกำกับ:

รายละเอียดเพิ่มเติม

Radial LX-2 Passive Line-Level Splitter & Attenuator

สปริตเตอร์แยกสัญญาน Radial LX-2, passive balanced line-level audio splitter that allows you to easily send an audio signal to two different destinations at once without noise, while also providing the ability to attenuate the signal when needed

The LX-2 performs the dual functions of splitting a line level audio signal and providing level attenuation where necessary. A premium Jensen transformer inside provides exceptional frequency response and phase coherency to ensure that the highest audio quality is maintained, while isolating the two outputs from each other to eliminate hum and buzz from ground loops.

For situations where a level adjustment is required, the trim control on the LX-2 allows you to attenuate overly hot signals. This gives you the ability to drive your mic preamps hard to achieve coloration, while trimming the level at the LX-2 to avoid clipping the inputs of your recording interface.

This trim control is activated by a recessed ‘set & forget’ switch; if attenuation is not needed, simply disengage this switch to prevent accidental and unwanted level adjustments.

Features:

  • Split one audio signal to two destinations simultaneously
  • Jensen® transformer equipped for exceptional audio quality
  • Eliminates hum and buzz caused by ground loops
  • Variable trim control can be engaged for easy level

Specifications

Audio circuit type Passive, transformer based
Transformer Jensen JT-11-FLPCH
Number of channels 1 input, 1 iso output, 1 direct output
Frequency response 20Hz – 20kHz +/-0.5dB
Dynamic range 140dB
Gain -1.5dBu
Total harmonic distortion <0.001% @ 1kHz
Phase Deviation +0.3° @ 20Hz
Input Impedance 716Ω
Output Impedance: 116Ω
Common Mode Rejection Ratio 94dB @ 60Hz, 83dB @3kHz
Noise -119dBu
Maximum Input +21dBu
Features
Ground lift, Level Control
Input Connectors Combo XLR / 1/4″
Output Connectors isolated XLR, direct XLR
General
Construction 14-gauge steel
Size (L x W x D) 84mm x 127mm x 48mm (3.3″ x 5″ x 2″)
Weight 0.7kg (1.5lbs)
Shipping size (L x W x D) 102mm x 76mm x 165mm (4″ x 3″ x 6.5″)
Shipping weight 0.87 kg (1.92 lbs)
Power Passive, no power required
Conditions For use in dry locations only between 5°C and 40°C
Warranty Radial 3-year, transferable

Downloads

ดาวน์โหลด Manual Radial LX2

ดาวน์โหลด Data sheet Radial LX2