martin-audio_ths_loudspeaker

ลำโพง Martin Audio THS Triaxial Point Source Loudspeaker 15″

MARTIN AUDIO

ลำโพง Martin Audio THS เป็นลำโพงแบบ Bi-amp 3-way Passive ขนาดดอกลำโพง LF 15 นิ้ว เสียงกลาง MF 1.4 นิ้ว เสียงแหลม HF 1.4 นิ้ว ทนกำลังขับ 800 วัตต์ AES, 3200 วัตต์ peak, 8Ω nominal impedance, 85° H x 50° V dispersion, Supported by DISPLAY 3 software

256,800 ฿

ราคาสินค้าไม่รวมภาษีมูลค่าเพิ่ม

คำอธิบาย

Martin Audio THS Bi-amp 3-way Loudspeaker 15″ 800W

ลำโพง Martin Audio THS เป็นลำโพงแบบ Bi-amp 3-way Passive ขนาดดอกลำโพง LF 15 นิ้ว เสียงกลาง MF 1.4 นิ้ว เสียงแหลม HF 1.4 นิ้ว ทนกำลังขับ 800 วัตต์ AES, 3200 วัตต์ peak, 8Ω nominal impedance, 85° H x 50° V dispersion, Supported by DISPLAY 3 software

Capable of 135dB peak, THS is an extremely powerful point source loudspeaker which combines very high output with extended frequency response. It is ideally suited to medium-scale club applications and installations which call for exceptionally high sound levels from a compact, standalone loudspeaker system.

Packing three high-technology drivers into a relatively small trapezoid enclosure, its innovative three-way triaxial configuration delivers enhanced output for its size and gives it the edge over comparable two-way systems in terms of superior mid and high frequency performance.

Adding a compact Martin Audio SX subwoofer to extend low frequency output creates a dynamic, four-way setup with a small footprint. To ensure the most effective use of amplifier count, THS is designed to be bi-amplified, with an internal passive network performing the mid/high crossover function.

The THS triaxial driver is a remarkable, state-of-the-art device. Its LF section comprises a reflex-loaded, high-specification 15” LF driver with a 4” coil, waterproof cone and neodymium magnet structure. A 4” midrange ring radiator and a 2.5” HF ring radiator,

Both with high temperature polymer diaphragms, are arranged coaxially at the rear of the LF driver and integrated into a 1.4” exit. This transitions through the magnet structure of the LF driver into an 85° x 50° horn. The horn itself is user rotatable, with a large mouth to maintain pattern control down through the midrange.

The durable birch plywood enclosure is finished in hardwearing textured paint and incorporates multiple threaded inserts to facilitate a variety of portrait and landscape mounting options including eyebolt, yoke, pole and truss mounting.

Twin handles assist installation and deployment. A steel grille with a triple-layer polyester backing protects the drivers and resists dust and water ingress.

Recommended amplifiers include Martin Audio iKON amplifiers with onboard DSP or VIA amplifiers used in conjunction with a DX4.0, DX0.6, or DX0.4 controller. THS systems can be modelled in 3D using DISPLAY 3 design and prediction software.

Features:

  • Bi-amp three-way loudspeaker system
  • Compact trapezoid enclosure with very high output capability
  • Triaxial Point Source configuration with user-rotatable mid/high frequency horn
  • 15” (380mm)/4” (100mm) voice coil, low distortion neodymium LF driver
  • 4” (100mm) HT polymer ring radiator/1.4” (35mm) exit MF driver
  • 5” (64mm) HT polymer ring radiator/1.4” (35mm) exit HF driver
  • 85° H x 50° V dispersion
  • Supported by DISPLAY 3 software

Specifications

TYPE Bi-Amp 3-way (Passive MF/HF) Loudspeaker
FREQUENCY RESPONSE 54Hz-18kHz ± 3dB, -10dB @43Hz with preset
DRIVER LF: 15” (380mm) / 4” (100mm) coil neodymium motor
MF: 1.4″ (25mm) exit / 4″ (100mm) coaxial HT polymer ring radiator
HF: 1.4” (25mm) exit / 2.5″ coaxial HT polymer ring radiator
RATED POWER LF: 800W AES, 3200W Peak
MF/HF: 110W AES, 440W Peak
SENSITIVITY LF: 100dB
MF/HF: 109dB
MAXIMUM SPL 129dB continuous, 135dB peak
NOMINAL IMPEDANCE LF: 8 Ohms
MF/HF: 8 Ohms
DISPERSION (-6DB) 85˚ horizontal, 50˚ vertical
CROSSOVER 650Hz/4.8kHz
ENCLOSURE Birch plywood
FINISH Textured black finish
PROTECTIVE GRILLE Black perforated steel
CONNECTORS NLT4MPXX-BAG speakons (pair)
PIN CONNECTIONS LF : 1+ / 1- ,
MF/HF : 2+/2- 1+ / 1-, 2+ / 2-
FITTINGS 13 x M10 fixings,
4 x M10 Bracket Mounting Points and
Two Handle Pockets
DIMENSIONS 710mm (H) x 457mm (W) x 511mm (D)
27.95ins (H) x 17.98ins (W) x 20.11ins (D)
WEIGHT 35.6 kg (78.48 lbs)

Downloads

ดาวน์โหลด Data Sheet Martin Audio THS