ลดราคา!
marshall_dsl40cr_guitar_amplifier

แอมป์กีตาร์ MARSHALL DSL40CR Tube Guitar Combo Amplifier

MARSHALL

ตู้แอมป์กีตาร์ Marshall DSL40CR เป็นตู้แอมป์กีตาร์แบบหลอดซึ่งออกมาแทน รุ่นเดิม DSL40C โดยมีการเพิ่ม Master Volume อีก 2 ปุ่ม, Front-Panel Output Switch (40 or 20W), Classic Gain & Ultra Gain Channels, 4 ECC83 Tubes & 2 EL34 Tubes, Digital Spring Reverb

24,000 ฿

ราคาสินค้าไม่รวมภาษีมูลค่าเพิ่ม

รายละเอียดเพิ่มเติม

Marshall DSL40CR 2-Ch Tube Guitar Combo Amplifier 40W

ตู้แอมป์กีตาร์ Marshall DSL40CR เป็นตู้แอมป์กีตาร์แบบหลอดซึ่งออกมาแทนรุ่นเดิม DSL40C โดยมีการเพิ่ม Master Volume อีก 2 ปุ่ม, Front-Panel Output Switch (40 or 20W), Classic Gain & Ultra Gain Channels, 4 ECC83 Tubes & 2 EL34 Tubes, Digital Spring Reverb, Footswitch Controller Included

The Marshall Amplification DSL40CR is a 6-valve combo amplifier for electric guitar. It features a single 12″ Celestion V-Type speaker, two channels with separate controls for volume and gain, a comprehensive equalization section, and channel-independent reverb. The Dual Super Lead (DSL) offers two channels, Classic Gain, and Ultra Gain, each with dual mode settings to provide a wide palette of classic Marshall tones.

2 Knobs for Master Volume Two independent master volume functions let you bring your solo to the forefront. With the PEDL-91005 footswitch (available separately), you can change your master levels with the tap of your toe.

Switchable Output Level on Front Panel A three-position rocker switch combines standby with high- and low-output power functions. The output stage and power control for this amplifier has been designed to deliver an even tonal performance at all power levels.

The high and low output functions allow you to choose between two configurations of the internal power supply: 40W or 20W, depending on your predilections. These two configurations give the choice between two output power levels, but ensure that the output valves behave the same way for both. This means the amplifier can be put into low power mode without compromising tone.

MIDI Compatibility The amp’s features can be controlled using any MIDI equipment, so you can play this amp and different MIDI equipment at any one time.

Features:

  • Classic Gain & Ultra Gain Channels
  • Front-Panel Output Switch (40 or 20W)
  • 4 ECC83 Tubes & 2 EL34 Tubes
  • Volume & Gain for Each Channel
  • Mode Switches for Each Channel
  • 2 Knobs & 1 Button for Master Volume
  • 3-Knob Tone Stack
  • Resonance and Presence Controls
  • Digital Spring Reverb
  • Footswitch Controller Included

Specifications

Amplifier Section
Amplifier Type Tube
Output Power 40 W RMS
Channels 2
Tube Types 4 x Preamp 12AX7/ECC83
2 x Power EL34/6CA7
Output Impedance 16 ohms Mono
16/8 ohms Mono
8/4 ohms Mono
Effects Loop Yes, Series
Built-In Effects Digital Reverb
Master Volume Yes 
Inputs 1 x 1/4″ Mono Instrument
1 x 1/4″ Mono Effects Return
1 x 1/4″ Stereo Footswitch
1 x 1/8″ Stereo Aux
1 x 5-Pin DIN Series MIDI
Outputs 1 x 1/4″ Mono Effects Send
5 x 1/4″ Mono Speaker
1 x 1/4″ Mono Emulated Speaker
Tone Section Channel 1: Bass, Channel Volume, Gain, Mid, Presence, Resonance, Tone, Treble
Channel 2: Bass, Channel Volume, Gain, Mid, Presence, Resonance, Treble
Speaker Section
Speaker Inputs 1x 1/4″
Speaker Through/Output 4x 1/4″ 
Configuration 1x 12″ Speaker(s)
Cabinet Type Straight Half-Open Mono
Power Rating 80 W
Input Impedance 16 ohms Mono
Covering Tolex
General
Dimensions (WxHxD) 24.4 x 19.3 x 9.9″ / 620.0 x 490.0 x 252.0 mm Amplifier
Weight 50.49 lb / 22.9 kg Amplifier
Packaging Info
Package Weight 62.55 lb
Box Dimensions (LxWxH) 29.0 x 25.0 x 14.5″

Downloads

ดาวน์โหลด Manuals Marshall DSL40CR

Video