Sale!
marshall_dsl1hr_head_guitar_amplifier
marshall_dsl1hr_head_guitar_amplifier_1 marshall_dsl1hr_head_guitar_amplifier_2 marshall_dsl1hr_head_guitar_amplifier_3

หัวแอมป์กีตาร์ MARSHALL DSL1HR Tube Head Amplifier

หัวแอมป์กีตาร์ Marshall DSL1HR เป็นหัวแอมป์กีตาร์แบบหลอดมีกำลังขับ 1 วัตต์ Dual-Channel Operation, Rear-Panel Output Switch (1 or 0.1W), 2 ECC83 Tubes & 1 ECC82 Tube, 1 x 1/4″ 16-Ohms Speaker Output Jack, Onboard Effects Loop, Digital Spring Reverb, Footswitch Included

12,000 ฿ 9,600 ฿

ราคาสินค้าไม่รวมภาษีมูลค่าเพิ่ม

รายละเอียด

Marshall DSL1HR 1W 2-Ch Valve Amplifier Head with Reverb

หัวแอมป์กีตาร์ Marshall DSL1HR เป็นหัวแอมป์กีตาร์แบบหลอดมีกำลังขับ 1 วัตต์ Dual-Channel Operation, Rear-Panel Output Switch (1 or 0.1W), 2 ECC83 Tubes & 1 ECC82 Tube, 1 x 1/4″ 16-Ohms Speaker Output Jack, Onboard Effects Loop, Digital Spring Reverb, Footswitch Controller Included

The Marshall Amplification DSL1HR is a two-channel amplifier head powered by three valves/tubes. One channel gives you a cleaner tone, while the other is suitable for your distortion needs. A three-knob tone stack, coupled with a tone shift button that reshapes the preamp’s EQ, helps you dial in your preferred timbre.

With a low-power switch on the back, you can reduce the output from 1W to 0.1W without affecting the tone. Thus, you can practice in your home with minimal disturbance to your family or neighbors.

An onboard effects loop gives you the ability to put your pedals or external processors directly in the amplifier’s signal path, while a reverb knob on the front panel allows you to apply some ambience to your signal.

An auxiliary input is on hand for jamming along to your favorite tunes. You can route your signal from the emulated output jack to headphones or to a recording interface, taking advantage of the Softube-designed studio-cabinet emulation all the while.

This amplifier head sports a single 1/4″ speaker output jack rated at 16 Ohms. You can use this amplifier with speakers such as the 160HM extension speaker cabinet, or you can use it as a front end for your interface’s DI input, using the emulated output jack in coordination with a 3.5mm-to-1/4″ adapter. A footswitch is supplied, with which you can choose between the two channels.

Features:

  • Capable of conjuring any classic Marshall sound — past or present
  • 2 channels — Classic Gain and Ultra Gain
  • High and low power modes allow you to dial in appropriate volume for any setting
  • Line output with Softube’s accurate emulation of a Marshall 1960 cab
  • Refined EQ section gives you incredible tonal flexibility
  • Studio-grade digital reverb
  • Rear-panel series effects loop

SPECIFICATIONS

Amplifier Section
Amplifier Type Tube
Output Power 1 W
Channels 2
Tube Types 2 x Preamp 12AX7/ECC83
1 x Power 12AU7/ECC82
Output Impedance 16 ohms Mono
Effects Loop Yes, Series
Built-In Effects Digital Reverb
Master Volume No
Inputs 1 x 1/4″ Mono Instrument
1 x 1/4″ Mono Footswitch
1 x 1/4″ Mono Effects Return
1 x 1/8″ Mono Aux
Outputs 1 x 1/4″ Mono External Speaker
1 x 1/4″ Mono Effects Send
1 x 1/8″ Mono Emulated Speaker
Tone Section Channel 1: Bass, Channel Volume, Mid, Treble
Channel 2: Bass, Channel Volume, Gain, Mid, Treble
General
Dimensions (WxHxD) 14.2 x 8.3 x 8.5″ / 360.0 x 210.0 x 215.0 mm Amplifier
Weight 12.35 lb / 5.6 kg Amplifier

DOWNLOADS

ดาวน์โหลด Manuals หัวแอมป์กีตาร์ MARSHALL DSL1HR

VIDEO