ลดราคา!
symetrix_radius-12×8-ex_signal_processor

Digital Signal Processor SYMETRIX RADIUS 12X8 EX

SYMETRIX

อุปกรณ์ปรับแต่งสัญญาณเสียง SYMETRIX RADIUS A Powerful General Purpose DSP / A Version with AEC

(Discontinued) ปัจจุบันเปลี่ยนรุ่นเป็น Digital Signal Processor SYMETRIX RADIUS NX 12×8 Dante USB-B

Original price was: 132,000 ฿.Current price is: 112,200 ฿.

ราคาสินค้าไม่รวมภาษีมูลค่าเพิ่ม
หมวดหมู่: ป้ายกำกับ:

คำอธิบาย

SYMETRIX RADIUS 12X8 EX Digital Signal Processor

อุปกรณ์ปรับแต่งสัญญาณเสียง SYMETRIX RADIUS A Powerful General Purpose DSP / A Version with AEC, 12X8 EX 128 Channel (64×64) Redundant Dante, On-board Ethernet and Dante Network Switches, 1 I/O Expansion Card Slot, 12 Analog Inputs / 8 Analog Outputs

The Radius 12×8 EX featuring a configurable input/output option card slot, is a universal DSP building block with a 64×64 Dante™ network audio port,12 analog mic/line inputs, and 8 analog outputs.

The addition of the versatile option card slot reduces total system costs by maximizing the number of inputs or outputs in a single 1U DSP. For example, adding a Symetrix 4 Channel Analog Input Card creates a 16×8 analog configuration; with a 4 Channel Analog Output Card the result is 12×12.

The expansion slot supports an array of Symetrix audio I/O cards including 4-channel analog, 4-channel digital, 4-channel AEC, 2 line analog telephone, 2 line VoiP, and USB audio

Features:

  • A Powerful General Purpose DSP / A Version with AEC
  • 128 Channel (64×64) Redundant Dante
  • On-board Ethernet and Dante Network Switches
  • 1 I/O Expansion Card Slot
  • 12 Analog Inputs / 8 Analog Outputs

Specifications

General Specifications

Processors 1 x Analog Devices SHARC 21489 @ 400 MHz SIMD.
Raw processing capacity 400 MIPS, 1.6 GFLOPS.
Sampling rate 48 kHz, ± 100 ppm.
Frequency response (A/D/A) 20 Hz – 20 kHz, ± 0.5 dB.
Dynamic range (A/D/A) > 114 dB, A-weighted.
Channel separation (A/D/A) > 108 dB @ 1 kHz, +24 dBu.
Latency (A/D/A) 0.88 mS, inputs routed to outputs.
Delay memory 174 mono seconds.
Analog control inputs 0-3.3 VDC.
Recommended external control potentiometer 10k Ohm, linear.
Logic outputs Low (0V) when active, pulled high (5V) when inactive.
Logic output maximum external power supply voltage / current sinking 24 VDC / 50 mA.
Logic output maximum output current 10 mA.
THD + Noise < -85 dB (unweighted); 1 kHz @ +22 dBu with 0 dB gain.
RS-232 accessory serial I/O 57.6 kbaud (default), 8 data bits, 1 stop bit, no parity, no flow control wired straight-through, only pins 2, 3, and 5 required.
RS-485 serial I/O 38.4 kbaud (default) 8 data bits, 1 stop bit, no parity, no flow control. May be broken out of ARC port.
Ethernet Cable Standard CAT5, maximum device to device length = 100 meters.
Dante Cable Standard CAT6, maximum device to device length = 100 meters.
ARC Cable Standard CAT5, distance dependent upon load and number of devices.
Maximum stored presets 1000.

Analog Inputs

Connectors 3.81 mm terminal blocks.
Number of inputs Twelve (12) switchable balanced mic or line level.
Nominal input level +4 dBu with 20 dB of headroom.
Maximum input level +23 dBu.
Mic pre-amp gain 0, 11.8, 24, 44 or 54 dB switchable with ± 24 dB trim.
Mic pre-amp EIN < -127 dB with 150 Ohm source impedance.
CMRR > 76 dB @ 1 kHz, unity gain.
Input impedance 8 k Ohms balanced, 4 k Ohms unbalanced.
Phantom power (per input) +48 VDC @ 10 mA maximum.
Dynamic range > 115 dB, A-weighted.
THD + Noise < -94 dB, unweighted; 1 kHz @ +22 dBu with 0 dB gain.
Latency 0.28 mS.

Analog Outputs

Connectors 3.81 mm terminal blocks.
Number of outputs Eight (8) balanced line level.
Nominal output level +4 dBu with 20 dB of headroom.
Maximum output level +24 dBu (+22.8 dBu into a 2 k Ohm minimum load).
Output impedance 300 Ohms balanced, 150 Ohms unbalanced.
Dynamic range > 117 dB, A-weighted.
THD + Noise < -95 dB, unweighted; 1 kHz @ +22 dBu with 0 dB gain.
Latency 0.60 mS.

Mechanical Data

Space Required 1U (WDH: 18.91 in. x 9.5 in. x 1.72 in. / 48.02 cm x 24.13 cm x 4.37 cm). Depth does not include connector allowance. Allow at least 3 inch additional clearance for rear panel connections. Additional depth may be required depending upon your specific wiring and connections.
Electrical 100-240 VAC, 50/60 Hz, 45 Watts maximum universal input. No line voltage switching required.
Ventilation Maximum recommended ambient operating temperature is 30 C / 86 F. Ensure that the left and right equipment sides are unobstructed (5.08 cm, 2 in. minimum clearance). The ventilation should not be impeded by covering the ventilation openings with items such as newspapers, tablecloths, curtains, etc.
Shipping Weight 13 lbs. (5.9 kg).
Certifications or Compliance UL 60065, cUL 60065, IEC 60065, EN 55103-1, EN 55103-2, FCC Part 15, RoHS.

Downloads

ดาวน์โหลด Software & All Documents SYMETRIX RADIUS 12X8 EX