klark-teknik_dn100_direct_box

Di Box KLARK TEKNIK DN100 V2 Direct Box

KLARK TEKNIK

Direct Box KLARK TEKNIK DN100 V2 High-headroom design with +48 V phantom power for extended dynamic range 30 dB input pad and earth lift switches

4,200 ฿

ราคาสินค้าไม่รวมภาษีมูลค่าเพิ่ม
หมวดหมู่: ป้ายกำกับ:

รายละเอียดเพิ่มเติม

KLARK TEKNIK DN100 V2 Active Direct Injection Box

Direct Box KLARK TEKNIK DN100 V2 High-headroom design with +48 V phantom power for extended dynamic range 30 dB input pad and earth lift switches, Aluminium extrusion casing with protective silicone rubber sleeve

The KLARK TEKNIK DN100 Single Channel Active Direct Injection Box is designed to provide an extended dynamic range, lower noise floor and all the world-class audio performance you’d expect from KLARK TEKNIK.

The DN100 is built to handle the rigours of life on the road: a thick aluminium shell protects the electronics, and this in turn is protected by a tough silicone rubber casing.

The DN100 was designed for professional applications where +48 V phantom power is a standard feature on all mixing consoles. Some DI boxes offer both phantom power and 9V battery operation, however the design compromises required to support both power sources means that the audio performance is degraded. Most notably the amount of signal headroom available.

The clip point of the DN100 is significantly higher than many professional active DI boxes and can provide +10 dBu into a 2 kΩ load. This higher clipping point means that much higher level input signals can be accommodated without the need for switching in an attenuating pad.

Correspondingly the DN100 only requires a single -30 dB pad for use when connecting directly to instrument amplifier outputs.

Features:

  • High-headroom design with +48 V phantom power for extended dynamic range
  • Fully transformer-isolated design ensures electrical separation between PA and stage equipment
  • Balanced line input on Neutrik* XLR and high impedance input and link output on 1/4″ TRS connectors
  • 30 dB input pad and earth lift switches
  • Features Kensington* lock for added security
  • Aluminium extrusion casing with protective silicone rubber sleeve
  • Compact and rugged design
  • Designed and engineered in England

Specifications

Input Connections 2 x 1/4″ TS phone
1 x XLR
Output Connectors 1 x XLR
Input Level 30dBu
Output Level 10dBu with load >2kΩ
Controls -30dB input pad
Ground lift switch
Frequency Response 20Hz to 20kHz, +0.5/-1.0dB
Noise -100dBu, 20Hz to 20kHz unweighted, with input terminated by 10k resistor
Power +48VDC phantom power
Dimensions (WxDxH) 4-1/4 x 5-5/8 x 2-3/8″ (106 x 142 x 60 mm)
Weight 2.2 lbs (1 kg)
Specialties Security slot for Kensington MicroSaver security cable

Downloads

ดาวน์โหลด Quick Start KLARK TEKNIK DN100 V2

Video