ลดราคา!
dbx_iqe15

อีควอไลเซอร์ dbx iEQ15 Graphic Equalizer 2 x 15 Band

กราฟฟิคอีควอไลเซอร์ dbx iEQ15 อีคิวแบบ 2×15 band Graphic Equalizer, Advanced Feedback Suppression (AFS), dbx Type V noise reduction, PeakStopPlus Limiting, 2/3-octave Constant Q frequency bands, Relay bypass for power failure system protection

34,900 ฿

ราคาสินค้าไม่รวมภาษีมูลค่าเพิ่ม

หมวดหมู่: ป้ายกำกับ:

รายละเอียดเพิ่มเติม

dbx iEQ15 Dual 15-Band Graphic EQ with Type V™ NR and AFS®

กราฟฟิคอีควอไลเซอร์ dbx iEQ15 อีคิวแบบ 2×15 band Graphic Equalizer, Advanced Feedback Suppression (AFS), dbx Type V noise reduction, PeakStopPlus Limiting, 2/3-octave Constant Q frequency bands, Relay bypass for power failure system protection

The dbx iEQ-15 is a dual channel, 15 band graphic equalizer that offers state-of-the-art digital EQ performance and specifications with an analog look and feel. Besides including two 15 band channels of 2/3-octave equalization, the unit also offers +12 dB input gain range, switchable +6 or +15dB boost/cut range and 40mm faders with nonconductive nylon sliders.

The iEQ-15 also offers the AFS (Advanced Feedback Suppression) feedback elimination module. The AFS uses Precision Frequency Detection and state-of-the-art processing to determine the exact portions of a given frequency that is causing feedback without removing approximately half of the signal power, as is the case with the traditional method of moving the offending frequency’s slider.

Additionally, the unit offers dbx Type V noise reduction and PeakStopPlus limiting for taming unwanted peaks. XLR, 1/4″ and Euroblock inputs and outputs and an intuitive user interface with comprehensive output and gain reduction metering round out this professional EQ that is perfect for touring applications or in installed sound venues.

Features:

  • Advanced Feedback Suppression (AFS™)
  • Type V™ Noise Reduction
  • PeakStopPlus® Limiting
  • 2/3-octave Constant Q frequency bands
  • Switchable boost/cut ranges of +6 or +15dB
  • 18 dB per octave 40Hz low-cut filter
  • +12dB input gain range
  • XLR, TRS and Euroblock Inputs and Outputs
  • Internal Toroidal Transformer
  • Frequency Response of 10Hz to 22kHz
  • Dynamic range of greater than 113dB
  • User Power Up Features
  • Relay Bypass for Power Failure System Protection

Specifications

Input Connectors 1/4″ TRS, female XLR (pin 2 hot), and Euroblock
Input Type Electronically balanced/unbalanced, RF filtered
Insert Impedance Balanced 40k ohm, unbalanced 20k ohm
Max Input >+22dBu balanced or unbalanced
CMRR >40dB, typically >55dB at 1kHz
Output Connectors 1/4″ TRS, male XLR (pin 2 hot), and Euroblock
Output Type Active-balanaced/unbalanced, RF filtered
Output Impedance Balanced >120 ohm, unbalanced >60 ohm
Max Output >+20dBu balanced/unbalanced into 2k ohm or greater
Frequency Response 20Hz to 20kHz, +0.5/0.25dB
Dynamic Range >113dB, “A” weighted
THD+Noise <0.003%, typical at +4dBu, 1kHz
Interchannel Crosstalk <-80dB, 20Hz to 20kHz
Noise Reduction Up to 10dB of dynamic broadband noise reduction
Digital Resolution 24 bits
Sample Rate 48kHz
Latency 2msec
Operating Voltage 120VAC 60Hz, 220/240VAC 50/60Hz
Power Consumption 17 Watts
Power Connector IEC receptacle
Dimensions 3.5″ H x 19″ W x 7.9″ D

Downloads

ดาวน์โหลด Datasheet Manual อีควอไลเซอร์ dbx iEQ15