crest-audio_tactus_stage
crest-audio_tactus_stage_1 crest-audio_tactus_stage_2

สเตจบ๊อก Crest Audio Tactus STAGE 32/16 SoundGrid Stage Box

สเตจบ๊อก Crest Audio Tactus STAGE สามารถรองรับได้จำนวน 16 อินพุตและ 32 อินพุต Mic input accepts a +27 dBu input signal without a pad, Waves SoundGrid Digital audio network protocol, Parallel/Bridge/Stereo mode switch, Headphone output with level control,  MIDI in and switchable out or thru

211,500 ฿

ราคาสินค้าไม่รวมภาษีมูลค่าเพิ่ม

หมวดหมู่: ป้ายกำกับ:

รายละเอียด

Crest Audio Tactus STAGE 32/16 SoundGrid Stage Box

สเตจบ๊อก Crest Audio Tactus STAGE สามารถรองรับได้จำนวน 16 อินพุตและ 32 อินพุต Mic input accepts a +27 dBu input signal without a pad, Waves SoundGrid Digital audio network protocol, Parallel/Bridge/Stereo mode switch, Headphone output with level control,  MIDI in and switchable out or thru

The Tactus.Stage serves as a 32 Input x 16 Output analog patch which converts and taxi’s audio over SoundGrid to and from the Tactus.FoH Server.

It also offers 2x AES3 Digital outputs, Midi connections, Word clock BNC connections, a Headphone TRS Input jack and a 3-port Gb built in switch with an additional direct low latency port.
Multiple Tactus.Stage units can be configured in a single system offering scalable, flexible and switched AB configurations.

Features:

  • 32 microphone/line inputs
  • XLR mic and TRS 1⁄4″ line inputs
  • 16 Line outputs
  • High performance digitally controlled microphone preamps feature:
  • Low input noise at both high and low gain settings
  • High slew-rate, Very low THD
  • Mic input accepts a +27 dBu input signal without pad
  • 66 dB adjustment range in 1 dB steps to maximize dynamic range
  • Gain changes on zero crossing to minimize adjustment noise.
  • 48 Volt phantom power switchable on every mic input.
  • Integral gigabit Ethernet switch for easy networking
  • Waves SoundGrid Digital audio network protocol
  • Balanced output maximum level switchable between + 24 dBu and + 18 dBu
  • Supports sample rates of 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz
  • External word clock input and output
  • Two AES digital outputs
  • Headphone output with level control
  • MIDI in and switchable out or thru
  • 4U rack mount package, Universal input power supply

SPECIFICATIONS

XLR Input  
Full scale input sensitivity Adjustable from +26 dBu to -42 dBu corresponding to gain settings -8 to 60
Frequency Response +0/-0.2 dB 15 Hz to 22 kHz @ 48 kHz sample rate
+0/-0.2 dB 17 Hz to 40 kHz @ 96 kHz sample rate
Dynamic Range (Measured bandwidth limited 20 Hz to 20 kHz) 110 dB Gain = 0
EIN (Gain 60, 150 Ohms) -128.7 dBu A weighted
THD+N (Measured at 1 kHz, Gain = 0) 0.0015%
Phase Response +/- 10 Deg 20 Hz to 20 kHz
Input impedance 2 K Ohm
48V phantom power available  
XLR Balanced outputs  
Selectable maximum output level +18 dBu or + 24 dBu  
Frequency Response +0/-0.2 dB 15 Hz to 22 kHz @ 48 kHz sample rate
+0/-0.2 dB 17 Hz to 40 kHz @ 96 kHz sample rate
Dynamic Range  (Measured bandwidth limited 20 Hz to 20 kHz) 110 dB Gain = 0
EIN (Gain 60, 150 Ohms) -128.7 dBu A weighted
THD+N (Measured at 1 kHz, Gain = 0) 0.0015%
Phase Response +/- 10 Deg 20 Hz to 20 kHz
Input impedance 2 K Ohm
Headphone output 1 Watt per channel into 32 Ohm headphones.
AES-3, AES-EBU Stereo Output. Output sample rate is tied to the mixer master clock.  
Word clock input Standard 5 Volt square wave. 50% duty cycle
Word clock output 1X sample rate Standard 5 Volt square wave. 50% duty cycle.
Word clock Input 1X sample rates of 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz.
Power requirements Universal input power supply 100V-240 VAC, 50/60 Hz, 50 Watts

*Specifications subject to change without notice

DOWNLOADS

ดาวน์โหลด Data Sheet Crest Audio Tactus STAGE

ดาวน์โหลด Manual Crest Audio Tactus STAGE

ดาวน์โหลด Brochure Crest Audio Tactus