Music Space (Thailand)

Member

สินค้า

ลดราคา!
tascam_us-1x2_audio_interface

ออดิโออินเตอร์เฟส TASCAM US1x2 USB Audio Interface

TASCAM

ออดิโออินเตอร์เฟส TASCAM US1X2, 2-in/2-out audio streaming from a PC connected via USB 2.0, Ultra-HDDA mic preamp, High resolution recording up to 96kHz/24-bit, Separate inputs for mics and instruments / line level sources

(Discontinued) ปัจจุบันเปลี่ยนรุ่นเป็น

Original price was: 3,990 ฿.Current price is: 3,900 ฿.

ราคาสินค้าไม่รวมภาษีมูลค่าเพิ่ม
หมวดหมู่: ป้ายกำกับ:

คำอธิบาย

TASCAM US1x2 USB Audio Interface

ออดิโออินเตอร์เฟส TASCAM US1X2, 2-in/2-out audio streaming from a PC connected via USB 2.0, Ultra-HDDA mic preamp, High resolution recording up to 96kHz/24-bit, Separate inputs for mics and instruments / line level sources

The US-1×2 is the ideal USB audio interface for entry-level users. It is small, lightweight and economically priced, but nevertheless of high quality. The model features one microphone and one line/instrument input and an RCA unbalanced stereo analogue input as well as an RCA unbalanced analogue output.

It enables you to record or stream to the Internet vocals and a single instrument or a stereo source, or archive your cassette tape collection – at up to 96 kHz/24 bit using virtually any major DAW software or recording app under Windows, macOS or iOS.

The US-1×2 features a Tascam original ultra-HDDA mic preamp with very low input noise and a high gain range of 57 dB for dynamic mics as well as phantom power for condenser mics.

Further features include latency-free direct monitoring, a headphones output with level control, stereo/mono input monitor modes and a mute switch on the software settings panel. A license for Cubase LE including Cubasis LE is also included. And, last but not least, the interface can be operated in standalone mode for practice sessions when used with an external power supply.

Features:

  • One high-quality Ultra-HDDA (High Definition Discrete Architecture) microphone pre-amp with ultra-low noise (EIN: –127 dBu)
  • Recording at up to 96 kHz / 24 bits, Support for Windows, Mac and iOS operating systems
  • 2-in/2-out audio streaming from a PC connected via USB 2.0, One XLR microphone input with phantom power supply
  • Wide input gain range of 57dB for dynamic microphones
  • One 6.3-mm TRS analogue input selectable between line and instrument level
  • Stereo RCA analogue inputs and outputs, Zero-latency monitoring (direct monitoring)
  • Headphones output delivering 18 mW per channel, Independent level controls for line and phones outputs
  • Input signals can be monitored in stereo or mono, Input can be muted on the software settings panel
  • USB bus-powered for mobile recording, USB Audio Compliance 2.0 for iOS connection
  • Standalone operation for practice sessions (requires an external power source)
  • Notification function keeps you updated with the latest information for your product
  • Automatic update notification helps you to keep your software and firmware up to date (you can install new updates with the press of a button)
  • Bundled with Cubase LE including Cubasis LE, Rugged aluminum body, Angled industrial design for ease-of-use on a desktop

Specifications

General
Sampling frequencies 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Quantization bit depth 16/24 bits
Analogue audio inputs
Mic input (balanced, IN1) XLR-3-31 (1: GND, 2: HOT, 3: COLD)
  Input impedance 2.4 kΩ
  Nominal input level (gain knob at max.) −65 dBu (0.0004 Vrms)
  Nominal input level (gain knob at min.) −8 dBu (0.0775 Vrms)
  Maximum input level +8 dBu (1.9467 Vrms)
  Maximum gain 57 dB
Line/instrument input (balanced/unbalanced, IN2) 6.3-mm standard TRS stereo jack
(Tip: HOT, Ring: COLD, Sleeve: GND)
  When set to LINE (balanced)
  Input impedance 10 kΩ
  Nominal input level (gain knob at max.) −41 dBu (0.0069 Vrms)
  Nominal input level (gain knob at max.) +4 dBu (1.228 Vrms)
  Maximum input level +20 dBu (7.75 Vrms)
  Maximum gain 45 dB
  When set to INST (unbalanced)
  Input impedance ≥1 MΩ
  Nominal input level (gain knob at max.) −51 dBV (0.0028 Vrms)
  Nominal input level (gain knob at max.) –6 dBV (0.5015 Vrms)
  Maximum input level +4 dBV (1.584 Vrms)
  Maximum gain 45 dB
Line input L/R (unbalanced) RCA
  Input impedance 10 kΩ
  Maximum input level +10 dBV (3.162 Vrms)
Analogue audio outputs
Line output L/R (unbalanced) RCA
  Output impedance 100 Ω
  Maximum output level +6 dBV (1.995 Vrms)
Headphones output 6.3-mm standard stereo jack
  Maximum output power 18 mW + 18 mW or higher
(THD+N 0.1% or less, 32 Ω)
Other inputs and outputs
USB 4-pin USB B-type
  Transfer rate USB 2.0 Hi-speed (480 Mbits/s)
Power supply (DC IN 5V) USB Micro B type
Audio performance
Mic preamp EIN (equivalent input noise) −127 dBu or less
(150 Ω termination, gain knob at max.)
Frequency response (input to line or headphones* output)
  44.1/48 kHz 20 Hz: +0/−0.5 dB (JEITA)
20 kHz: +0/–0.5 dB (JEITA)
20 kHz: +0/–1 dB* (JEITA)
  88.2/96 kHz 20 Hz: +0/−0.5 dB (JEITA)
40 kHz: +0/−1.0 dB (JEITA)
40 kHz: +0/–3.0 dB* (JEITA)
S/N ratio 100 dB or higher
(22-kHz LPF, A-weighted, line input to line output, gain knob at min., standalone mode, JEITA)
Distortion 0.006 % or less
(1-kHz sine wave, line input to line output, rated input level, max. output level, standalone mode, JEITA)
Crosstalk 95 dB or more
(1-kHz sine wave, line input to line output, standalone mode, JEITA)
Host computer requirements
Windows
  Supported operating systems Windows 10, 32 bits or 64 bits
Windows 8.1, 32 bits or 64 bits
Windows 7, 32 bits or 64 bits, SP1 or later
  Computer hardware requirements Windows-compatible computer with a USB 2.0 port
  CPU/processor speed 2 GHz or faster dual core processor (x86)
  Memory 2 GB or more
  Supported audio drivers ASIO 2.0, WDM
Mac
  Supported operating systems macOS Sierra (10.12 or later)
OS X El Capitan (10.11 or later)
OS X Yosemite (10.10 or later)
  Computer hardware requirements Mac with a USB 2.0 port
  CPU/processor speed 2 GHz or faster dual core processor
  Memory 2 GB or more
  Supported audio driver Core Audio
iOS device iOS device running iOS 7 or later
  Supported audio driver Core Audio for iPhone
Power supply and other specifications
Power supply
  Used with a computer USB bus power
  Used with an iOS device USB power adapter (that can supply 5 V and a current of at least 700 mA)1
External battery pack (that can supply 5 V and a current of at least 700 mA)2
Power consumption 2.5 W
Dimensions (H × W × D, without protrusions) 146 mm × 55 mm × 120 mm
Weight 623 g
Operating temperature range 5–35 °C
1 We strongly recommend using a Tascam PS-P520E or the USB power adapter included with the iPad/iPhone. No USB power adapter is included with an iPod Touch. To use it with an iPod Touch, purchase a genuine Apple USB power adapter (that can supply 5 V and a current of at least 700 mA) separately.
2 We strongly recommend using a Tascam BP-6AA external battery pack. If using another external battery pack or mobile battery, purchase one that can supply 5 V and a current of at least 700 mA.

Downloads

ดาวน์โหลด Manuals-Software ออดิโออินเตอร์เฟส TASCAM US1x2 USB

สินค้าที่เกี่ยวข้อง