lab-gruppen_fp7000_power-amp

เพาเวอร์แอมป์ LAB GRUPPEN FP7000 Power Amplifier

LAB GRUPPEN

เครื่องขยายเสียง (เพาเวอร์แอมป์) LAB GRUPPEN FP7000 Stereo Power Amplifier with NomadLink Network Interface, มีกำลังขับ 2x1450w @ 8 ohms,  2 x 3500 W @ 2 ohms, Class TD® amplifier topology, XLR input and link connectors Heavy-duty binding posts

182,000 ฿

ราคาสินค้าไม่รวมภาษีมูลค่าเพิ่ม
หมวดหมู่: ป้ายกำกับ:

คำอธิบาย

LAB GRUPPEN FP7000 Stereo Power Amplifier 2 x 3500 W

เครื่องขยายเสียง (เพาเวอร์แอมป์) LAB GRUPPEN FP7000 Stereo Power Amplifier with NomadLink Network Interface, มีกำลังขับ 2x1450w @ 8 ohms,  2 x 3500 W @ 2 ohms, Class TD® amplifier topology, XLR input and link connectors Heavy-duty binding posts

The versatile FP 7000 supplies power output (2 × 3500 W at 2 ohms) well matched to a wide variety of applications. At the core of the FP 7000’s performance is a breakthrough advance in Lab.gruppen’s patented Class TD® output stage, an amplifier topology that approaches the exceptional efficiency of Class D while retaining the sonic purity of proven Class B designs.

Further contributing to the remarkable efficiency of the FP 7000 is a Regulated Switch Mode Power Supply (R.SMPS™), which gives the added benefit of stabilizing rail voltages to the output even with wide fluctuations of mains voltage. A highly refined and updated circuit layout optimizes the interaction of R.SMPS and Class TD to produce the excellent power density of the FP 7000.

The FP 7000 is shipped with a NomadLink® network interface as standard. In conjunction with DeviceControl software, NomadLink allows monitoring of all key amplifier parameters and remote control of power on/off, channel mutes, and channel solo functions.

NB. NomadLink requires the separate NLB 60E NomadLink Bridge & Network Controller

Features:

  • Benchmark power density – The FP 7000 delivers a total of 7000 W (2 x 3500 W @ 2 ohms) in only 2U.
  • Lab.gruppen sound quality – impeccable sonic performance standards with durability and greater efficiency
  • NomadLink® network ready – Monitoring and control of key functions accessible via the intuitive DeviceControl software
  • Patented Class TD amplifier topology – Road-proven output stage delivers Class B audio quality with Class D efficiency
  • Regulated Switch Mode Power Supply (R.SMPS) – Output power remains constant even with significant drops in the mains voltage
  • Efficient cooling system – Unique, lightweight Intercoller copper cooling system dissipates more heat to allow extended peak output
  • Adjustable parameters – Selectable Gain, scalable Voltage Peak Limiter (VPL), and bridge-mode operation allow custom configuration for any application
  • Comprehensive protection and warning – Excessive output current, DC, high temperature, very high frequency (VHF), short circuit, open load, mains fuse protection, and soft start
  • XLR input connectors
  • Heavy-duty binding post or Speakon output connectors

Specifications

General
Number of amplifier channels 2
Peak total output all channels driven 7000 W
Peak output voltage per channel 155 V
Max output current per channel 59 A peak
Max output power (all channels driven)
2 ohms 3500 W
4 ohms 2800 W
8 ohms 1450 W
16 ohms 730 W
Max output power bridged
2 ohms Not recommended 1
4 ohms 7000 W
8 ohms 5600 W
16 ohms 2900 W
Performance
THD 20 Hz – 20 kHz at 1 W <0.1%
THD at 1 kHz and 1 dB below clipping <0.05%
Signal to Noise Ratio >112 dBA
Channel separation (Crosstalk) at 1 kHz >70 dB
Input impedance 20 kOhm
Common Mode Rejection (CMR) >54 dB, 20 Hz – 20 kHz
Gain, Sensitivity and Limiters
VPL, selectable per ch 155, 121, 101, 83, 70, 56, 47, 38 V
VPL, when bridged 2 310, 242, 202, 166, 140, 112, 94, 76 V
Voltage Peak Limiter mode (per ch.) Hard / Soft
Amplifier gain selectable (all channels) – rear-panel switches 2 23, 26, 29, 32, 35, 38, 41, 44 dB
Default gain 35 dB
Level adjustment (per channel) Front-panel potentiometer, 31 position detented from -inf to
Connectors and Buttons
Output connectors (per ch.) Neutrik speakON
Input connectors (per ch.) 3-pin XLR, electronically balanced
Output bridge mode A+B – Ch. A is signal input source. A+B, C+D – Ch.’s A and C are input source
NomadLink network On board, 2 x RJ45 connectors IN and OUT
Intelligent fans (on/off) Yes, depending on presence of output signal
Power on/off and Remote enable on/off Individual switches on front-panel
Cooling Dual fan, front to rear airflow, no filter required, temperature controlled speed
Front-panel user interface
Common NomadLink Network; Power Average Limiter (PAL)4; Power on
Per channel Signal present / High-impedance; -10 dB and -4 dB output signal;Voltage Peak Limiter (VPL); Current Peak Limiter (CPL): Very High Frequency (VHF); High temperature; Fault; Mute
Power
Operating voltage, 230 V / 115 V nominal 3 130-265 V / 65 -135 V
Minimum power-up voltage, 230 V / 115 V 171 V / 85 V
Power Average Limiter (PAL) 4 Yes
Soft-start / Inrush Current Draw Yes / max. 5 A
Mains connector 230 V CE: 16 A, CEE7; 115 V ETL: 30 A Twist lock
Dimensions
Dimensions W: 483 mm (19”), H: 88 mm (2 U), D: 396 mm (15.6”)
Weight
Weight 12 kg (26.4 lbs)
Finish
Finish Black painted steel chassis with black painted steel / aluminum front
Approvals
Approvals CE, ANSI/UL 60065 (ETL), CSA C22.2 NO. 60065, FCC

Note:

  • 1: Regarding n.r. (not recommended) notes: The amplifier will be fully operational in bridge-mode into 2 ohm and high impedance (Hi-Z) loads, but due to physical constraints in the construction, the max. output power will not be significantly higher than running individual channels and therefore this mode of operation is not recommended.
  • 2: Automatic -6 dB gain compensation when bridging channels.
  • 3: Separate 230 V or 115 V versions available. Not selectable on the amplifier.
  • 4: PAL can reduce the maximum output power to keep the power supply operating safely, and/or to prevent excessive current draw tripping the mains breaker. Refer to the FP+ Operation Manual section 7.5.8 Power Average Limiter (PAL) for more information.

Downloads

ดาวน์โหลด Data Sheet เพาเวอร์แอมป์ LAB GRUPPEN FP7000

ดาวน์โหลด Software, All Document LAB GRUPPEN FP7000

Video