symetrix_SOLUS_NX_4x4_dsp

Digital Signal Processor SYMETRIX SOLUS NX 4×4

SYMETRIX

อุปกรณ์ปรับแต่งสัญญาณเสียง SYMETRIX SOLUS NX 4×4  4 in, 4 out จอ OLED

(Discontinued) ปัจจุบันเปลี่ยนรุ่นเป็น Digital Signal Processor SYMETRIX Prism 4×4

96,000 ฿

ราคาสินค้าไม่รวมภาษีมูลค่าเพิ่ม
หมวดหมู่: ป้ายกำกับ:

รายละเอียดเพิ่มเติม

SYMETRIX SOLUS NX 4×4 Digital Signal Processor (Discontinued)

อุปกรณ์ปรับแต่งสัญญาณเสียง SYMETRIX SOLUS NX 4×4  4 in, 4 out จอ OLED สําหรับแสดงผลหน้าเครื่อง พร้อมกับ GPIO สําหรับการควบคุมและซอฟท์แวร์ Composer Remote Control Manager, Delay Memory Identical, DSP Processing Identical to Radius / Edge / Prism

SYMETRIX SOLUS NX Designed to serve in standalone DSP applications, those not requiring Dante network audio, the Solus NX series features the same DSP power and delay memory as Symetrix’ Radius, Prism, and Edge DSPs.

Solus NX is ideally suited for a large range of installed sound applications, delivering DSP-intensive processing, routing and delay in systems requiring sophisticated loudspeaker management, auto-mixing, paging, routing and distribution, mic/line processing, AGC, room combining and more.

Features:

  • Standalone DSP Price / Performance Breakthrough
  • DSP Processing Identical to Radius / Edge / Prism
  • Delay Memory Identical Radius / Edge / Prism
  • Serves in Applications Not Requiring Dante™

Three audio input/output options

a front panel high-resolution graphic OLED for display of system status and audio levels. A single push-button is used to navigate menus.

Powerful, efficient DSP configured using award winning Composer CAD design software.

**Route, process, and control audio in nearly unlimited ways serving countless applications. Eliminating the need for multiple software applications, all Symetrix open-architecture DSPs are programmed using Composer. Learn more Symetrix Composer Here

Multiple end user control options.

Solus NX DSPs can be controlled from Symetrix ARC wall panels including the universal mount ARC-3, the virtual ARC-WEB, Symvue a custom Windows® runtime control interface, third-party Ethernet equipped touch panels, or a combination of any or all of the above.

Transparency.  

An embedded web server displays analog I/O levels, diagnostics, and hosts the ARC-WEB control interface. The server is accessible from any networked smart phone, tablet, or computer by simply entering into the browser’s address field Solus NX’ local LAN or publicly accessible IP address, or its fully qualified domain name.

Specifications

Analog Inputs

Number of Balanced Mic / Line Inputs Four (4)
Connectors 3.81 mm terminal blocks.
Nominal Input Level +4 dBu line or -36 dBu mic level (software selectable) with 20 dB of headroom.
Maximum Input Level +23 dBu.
Mic Pre-amp gain +40 dB switchable with ± 24 dB of digital trim.
Mic Pre-amp EIN < -114 dBu, 22 Hz – 22 kHz, 100 Ω source impedance.
CMRR > 80 dB @ 1 kHz, unity gain.
Input impedance > 18k Ohms balanced, > 9k Ohms unbalanced, > 2k Ohms with phantom power engaged.
Phantom power (per input) +20 VDC @ 20 mA maximum per input.

Analog Outputs

Number of Balanced Line Outputs Four (4)
Connectors 3.81 mm terminal blocks.
Nominal Output Level +4 dBu with 20 dB of headroom.
Maximum Output Level +24 dBu (+22.8 dBu into a 2k Ohm minimum load).
Output Impedance 200 Ohms balanced, 100 Ohms unbalanced.
Dynamic Range > 117 dB, A-weighted.
THD+Noise < -97 dB; 22.4 kHz BW, unweighted; 1 kHz, +18 dBu output.

System

Sampling Rate 48 kHz, ± 100 ppm.
Frequency Response (A/D/A) 20 Hz – 20 kHz, ± 0.5 dB.
Dynamic Range (A/D/A) > 110 dB (A-weighted), input to output.
Channel Separation (A/D/A) > -90 dB @ 1 kHz, typical.
THD+Noise < -93 dB (un-weighted); 1 kHz @ +22 dBu with 0 dB gain.
Latency (A/D/A) < 1.6 mS, input routed to output.
Processors 1 x Analog Devices SHARC 21489 @ 400 MHz SIMD.
Raw Processing Capacity 400 MIPS, 1.6 GFLOPS.
Delay Memory 174 mono seconds.
Analog control inputs 0-3.3 VDC.
Recommended External Control Potentiometer 10k Ohm, linear.
Logic Outputs Low (0V) when active, pulled high (5V) when inactive.
Logic Output Maximum External Power Supply Voltage 24 VDC.
Logic Output Maximum External Power Supply Current Sinking 50 mA.
Logic Output Maximum Output Current 10 mA.
RS-485 Serial I/O 38.4 kbaud (default) 8 data bits, 1 stop bit, no parity, no flow control. May be broken out of ARC port.
Ethernet Cable Standard CAT5e or CAT6, maximum device-to-device length = 100 meters.
ARC Cable Standard CAT5, distance dependent upon load and number of devices. 8 Watts maximum power available.
Maximum Devices Per System 80 units per Site File.
Maximum Stored Presets 1000.

Mechanical Specifications

Space Required 1U (WDH: 18.91 in x 9.5 in x 1.72 in / 48.02 cm x 24.13 cm x 4.37 cm). Depth does not include connector allowance. Allow at least 3 inches of additional clearance for rear panel connections. Additional depth may be required depending upon your specific wiring and connections.
Electrical 24V 1.4A, 34W Maximum. Symetrix Part Number 12-0034. CUI part number SDI65-24-U-P5.
Ventilation Maximum recommended ambient operating temperature is 30 C / 86 F. Ensure that the left and right equipment sides are unobstructed (5.08 cm, 2 in minimum clearance). The ventilation should not be impeded by covering the ventilation openings with items such as newspapers, tablecloths, curtains, etc.
Certifications or Compliance Safety: UL 60065, cUL 60065, IEC 60065. EMC: “Class A” device (applies to all of the following) EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, FCC Part 15, ICES-003. Environmental: RoHS.
Shipping Weight 8.5 lbs. (3.9 kg)

Downloads

ดาวน์โหลด Software & All Documents SYMETRIX SOLUS NX

Video