ลดราคา!
dbx_160AD_2

คอมเพรสเซอร์ dbx 160A Compressor / Limiter

DBX

อุปกรณ์ปรับแต่งเสียง dbx 160A Compressor/Limiter, ingle Channel, OverEasy or Classic Hard Knee, Over 60dB of Gain Reduction Available, Stereo coupling via link connection to other device, Input / output monitoring

26,640 ฿

ราคาสินค้าไม่รวมภาษีมูลค่าเพิ่ม
หมวดหมู่: ป้ายกำกับ:

รายละเอียดเพิ่มเติม

dbx 160A Compressor / Limiter

อุปกรณ์ปรับแต่งเสียง dbx 160A Compressor/Limiter, ingle Channel, OverEasy or Classic Hard Knee, Over 60dB of Gain Reduction Available, Stereo coupling via link connection to other device, Input / output monitoring

Since its introduction in the mid 1970’s, the dbx160 series has been a very popular compressor. Solid construction, foolproof operation, great sound, at-a-glance metering and a bulletproof output stage, all contributed to its popularity with musicians, recording studios, consultants, installers and broadcast media production people.

The 160A from dbx is the latest generation of this family of compressor/limiters. It features switch-selectable OverEasy and Hard Knee compression curves, along with extremely wide-ranging threshold, ratio and output controls. True RMS level detection provides the most natural-sounding dynamics processing available, from subtle compression to “brick wall” peak limiting. The user can choose low ratios and OverEasy compression to transparently smooth out fluctuating vocal and instrumental levels, or use the Hard Knee compression and high ratios for absolute protection against overload distortion in digital recording, P.A. systems and broadcast signals.

The 160A’s unique “INFINITY +” inverse-compression mode actually decreases the audio output level below unity gain when the input exceeds threshold, a real lifesaver for correcting overbearing vocal choruses and controlling runaway house mix levels. A detector input can be used with an equalizer for de-essing sibilant vocals and selectively smoothing out boomy notes on acoustic guitar and bass. Two units can be stereo-coupled to process an entire mix or a stereo microphone setup, without shifting the left/right image.

Features:

  • OverEasy® or classic hard knee compression with dbx’s® ultra-musical program dependent attack and release times
  • Compression ratio variable from 1:1 through infinity :1 to negative compression
  • Precision dual RMS LED display monitors input or output and gain reduction over a wide range and calibrates for different operating levels
  • Over 60dB of gain reduction available
  • Exclusive Infinity+ compression allows negative compression
  • Independent balanced and unbalanced outputs can drive 600 loads to +24dBm simultaneously. New floating balanced output stage drives any load
  • Optional output transformer capable
  • Strappable with another 160A for true RMS stereo summing operation

Specifications

Input Connectors 1/4″ TRS and XLR, Floating Balanced; XLR: Pin 2 hot Phone: Tip Hot
Input Impedance 40k
Max Input +24dBu, Balanced or Unabalanced (Absolute)
CMRR >45dB (any Frequency)
Detector Input Connector: 14″ TRS phone, Floating Balanced
Detector Input Impedance >200k
Detector Input Max Level +28dBu, Balanced or Unbalanced
Output Connectors 1/4″ TRS phone, Unbalanced; XLR, floating balanced; pin 2 hot
Output Impedance Balanced 200 ohm, unbalanced 100 ohm
Max Output (Balanced): +24dBm; <0.3% THD; (Unbalanced): +20dBm; <0.3% THD
Noise <-90dBu, Unweighted (20Hz – 20kHz)
Frequency Response 20Hz -20kHz, +0, -0.5dB; +0, -3dB 0.5Hz and 90kHz.
THD <0.2%, Typical, any amount of compression up to 40dB @ 1kHz
Compressor Threshold Range -40dBu to +20dBu
Compressor Threshold Characteristic OverEasy® or hard knee
Compressor Ratio Variable 1:1 to :1 thru to -1:1; >60dB maximum compression
Compressor Attack Time Program dependent; typically 15ms for 10dB, 5ms for 20dB, 3ms for 30dB
Compressor Release Time Program Dependent; Typically 8ms for 1dB, 80ms for 10dB, 400ms for 50dB; 125dB/sec rate
Dynamic Range >113dB
Gain Adjustment Range Variable from -20dB to +20dB
Stereo Coupling True RMS Power summing
Summing 1/4″ TRS phone jack
Operating Voltage DO: 90-130VAC, 50/60Hz; EU: 200-250VAC, 50/60Hz
Power Connector IEC receptacle
Dimensions 1.75″ x 19″ x 6.5″ (4.45cm x 48.2cm x 16.51cm)

Downloads

ดาวน์โหลด Data Sheet dbx 160A