ลดราคา!
dbx_1046

คอมเพรสเซอร์ dbx 1046 Compressor/Limiter 4-Channel

DBX

อุปกรณ์ปรับแต่งเสียง Compressor/Limiter แบบ 4 ชาแนล dbx 1046V Quad Compressor/Limiter  Four independent channels, Selectable Auto (classic dbx) or manual (variable Attack and Release) compression, True RMS level detection

21,900 ฿

ราคาสินค้าไม่รวมภาษีมูลค่าเพิ่ม
หมวดหมู่: ป้ายกำกับ:

รายละเอียดเพิ่มเติม

dbx 1046 Four Channel Compressor/Limiter

อุปกรณ์ปรับแต่งเสียง Compressor/Limiter แบบ 4 ชาแนล dbx 1046V Quad Compressor/Limiter  Four independent channels, Selectable Auto (classic dbx) or manual (variable Attack and Release) compression, True RMS level detection

The dbx 1046 is designed to provide the audio professional with four channels of compression for a variety of applications. Incorporating dbx designs and the latest available manufacturing techniques, the unit provides sonic quality with the classic dbx sound.

The 1046 provides four channels of smooth OverEasy or hard knee compression, that can be used on individual tracks of a multitrack recorder, or in virtually any applications that requires separate channels to be individually interfaced and used for entirely independent purposes. Additionally the newly developed PeakStopPlus is ideal for protecting a system from the oppressive peaks that can take out valuable drivers in a sound reinforcement rig.

Each channel of the 1046 has a compressor threshold control, a switch to select the character of the compression circuit, ratio control and a gain make-up control. This is followed by the PeakStopPlus control, which sets the level to which the output signal is reduced whenever it exceeds this level. The four channels can also be linked to provide a pair of stereo units, and each channel features balanced gold plated XLR and 1/4″ inputs and outputs, and individually switchable +4dBu or -10dBV operating level to interface each channel with varying devices.

Features:

  • Four independent channels of operation, stereo linkable in two pairs
  • PeakStopPlus™ limiting control for setting maximum allowable level regardless of compressor settings
  • Independent Threshold and ratio controls
  • Switchable OverEasy® or Hard Knee compression
  • Classic dbx® compression
  • Differentially balanced gold-plated XLR and 1/4″ inputs and outputs
  • True RMS level detection
  • Precision metering of input level, output level, and gain reduction
  • Dual True stereo or quad mono operation
  • Switchable +4dBu or -10dBV operation per channel

Specifications

Input Connectors XLR and 1/4″ TRS (Pin 2 and tip hot)
Input Type Electronically balanced/unbalanced, RF filtered
Input Impedance Balanced > 40 kOhm, unbalanced >20 kOhm
Max Input > +22 dBu balanced or unbalanced
CMRR Typically >50 dB at 1 kHz
Output Connectors XLR and 1/4″ TRS (Pin 2 and tip hot)
Output Type Servo-balanced/unbalanced, RF filtered
Output Impedance Balanced 30 Ohm, unbalanced 15 Ohm
Max Output > +22 dBm balanced, > +20 dBm unbalanced
Bandwidth 20 Hz to 20 kHz, +0/-0.5 dB
Frequency Response 0.35 Hz to 90kHz, +0/-3 dB
Noise < -96 dBu, unweighted, 22 kHz measurement bandwidth
Dynamic Range > 118 dB, unweighted
THD+Noise >0.008% typical at +4 dBu (1 kHz unity gain), 0.08% typical at +20 dBu (1 kHz unity gain), < 0.1% any amount of compression up to 40 dB, 1 kHz
IMD < 0.1% SMPTE
Interchannel Crosstalk < -80 dB 20Hz to 20 kHz
Stereo Coupling True RMS Power Summing
Compressor Threshold Range -40 dBu to +20 dBu
Compressor Ratio 1:1 to infinity:1
Compressor Threshold Characteristic Selectable OverEasy® or hard knee
Compressor Attack/Release Characteristic AutoDynamic™
Compressor Attack Time Program-dependent
Compressor Release Time Program-dependent
Compressor Output Gain -20 to +20 dB
Limiter Threshold Range 0 dBu to +24 dBu (off)
Limiter Ratio infinity:1
Limiter Type PeakStopPlus® two-stage limiter
Limiter Stage 1 PeakStop® brickwall limiter
Limiter Stage 1 Attack Time Zero
Limiter Stage 1 Release Time Zero
Limiter Stage 2 Predictive intelligent program limiter
Limiter Stage 2 Attack Time Program-dependent
Limiter Stage 2 Release Time Program-dependent
OverEasy® Switch Activates the OverEasy compression function
I/O Meter Switch Switches between monitoring input and output levels on the Input/Output Level meter
Bypass Switch Activates the direct input-to-output hard-wire bypass
Operating Level Switch (rear panel) Switches the nominal operating level between -10 dBV and +4 dBu simultaneously for both input and output levels
ST Link Switch Links channels in stereo pairs. Channels One and Three become the master channels
Gain Reduction Meter 8 segment LED bar graph at 1, 3, 6, 10, 15, 20, 25, and 30 dB
I/O Meter 8-segment LED bar graph at -24, -18, -12, -6, 0, +6, +12, and +18 dBu
PeakStop™ Indicator 1 LED to indicate PeakStop™ limiting
Function Switches LED indicator for each front-panel switch
Output Transformer Options Jensen® JT-123-dbx or JT- 11-dbx, BCI RE- 123-dbx or RE-11-dbx
Operating Voltage Switchable:100-120 VAC 50-60 Hz or 200-240 VAC 50/60 Hz
Power Consumption 20 Watts
Fuse 100-120 VAC:250 mA Slow Blow, 200-240 VAC:125 mA Type T
Power Connector IEC receptacle
Dimensions 1.75″Hx19″Wx9″D (4.4cmx48.3cmx20.1cm)
Unit Weight 5.2 lbs. (2.4 kg)
Shipping Weight 7.6 lbs. (3.5 kg)

Downloads

ดาวน์โหลด Data Sheet dbx 1046V